Cheers, Not just skirts though.
Full BTCC Front bumper skin, rear bumper skin, skirts and tailgate spoiler.
Oh! and a Dual exit Stainless rear backbox from Ebay for 50% the price of an OE Seat mild steel one. Now with a SilverSurfer modification to get it to fit better ;)

Post a front and rear photo then :p

:agreed:

Where did you get the kit from? Looking at getting the same for mine.

Looks great ;)

Looks very nice

From http://www.seataccessories.co.uk/ who I found online, but then turned out to just happen to be my local SEAT dealer (who I nearly bought a 2010 White kitted FR from the week before)

http://www.seataccessories.co.uk/pro...t_ZGB1P1071670

That's the site I was looking at last week. Did the bumper come complete with the grilles etc?

Yes, comes with everything in 4 boxes, 2 of which are HUGE.
I had it delivered to the bodyshop they use, as they kit up a few for the forecourt.

The only extra bits I supplied were new number plates, Cupra front grill (deletes the chrome surround) and Dual exit exhaust (the bumper is marked on the inside for cuts to suite standard exit, centre exit or dual exit)
I saw it pre-painted and it's a good quality bit of kit. Certainly convinced me it's not worth spending £695 on the Ebay fibreglass copies.

Twin-Exit exhaust was from here : http://www.ebay.co.uk/itm/SEAT-LEON-...#ht_920wt_1018

It did need a tweak of the brackets to get it to sit closer to the body, but the brackets are removable, so easy enough to adjust.

If you end up going for the kit call them and speak to Carl or Steve who man the service desk and run the website.

Excellent, think I've found my Christmas present to myself, lol

Cheers

Looks great - just needs a vtec engine now :ok:

Very nice Scott. Think you have the best of both worlds there.:ok:

1st and 2nd gear are pretty pointless now trying to put down 355lb/ft at 2700rpm , even in the dry.
It's all over pretty quick though and a very different driving style is required compared to the Subaru.

http://img.photobucket.com/albums/v9...pse33f1e01.jpg

Wow, very impressive :ok:

Thats certainly a bundle more torque after the map, must seen a very fast road car now. Crazy when 3rd gear upwards the diesel pulls harder than the scoob!

Are 1st and 2nd gear not torque-limited on these then? On the mondeo it seems i get about 50% of peak torque to protect the gearbox, it only opens fully up in 3rd.

2nd certainly has some pull so I don't think that's torque limited.
1st is over too quickly to tell and besides it just flashes the traction control light which crudely cuts drive.

19" Alloy's and new Pagid 312mm Disks/Pads (rears to be done next week as needed a caliper rewind tool)
http://img.photobucket.com/albums/v9...pse17c908c.jpg

A few pictures of the new BTTC Aerokit
http://img.photobucket.com/albums/v9...psb86e03f4.jpg
http://img.photobucket.com/albums/v9...psab9dd728.jpg
http://img.photobucket.com/albums/v9...psa8d06779.jpg
http://img.photobucket.com/albums/v9...psf65ff686.jpg
http://img.photobucket.com/albums/v9...ps01c9e078.jpg

Exhaust and modifications required to get it to sit close to the bumper.
http://img.photobucket.com/albums/v9...ps6dc5da8f.jpg[/URL]
http://img.photobucket.com/albums/v9...pseefeea10.jpg[/URL]

That's some impressive torque :)

very nice figures and looks ace Scott.

Stunning Scott. Love the 19's, they really suit it. :10:

Looking :10: :10:

That looks the business, some really nice changes. 8-)

Cheers for the comments guy's.
Here's a few more piccies taken with a real camera instead of the Samsung phone thingy......

OH!!!!! and off-course it's fitted with the legendary SilverSurfer 2/3rd's size Front No. plate ;)

http://img.photobucket.com/albums/v9...ps62eaed37.jpg
http://img.photobucket.com/albums/v9...psb528de0d.jpg
http://img.photobucket.com/albums/v9...ps16f524be.jpg
http://img.photobucket.com/albums/v9...ps5787101d.jpg
http://img.photobucket.com/albums/v9...ps5f6de14b.jpg

Very nice Scott so whats next?

Not a lot, got it how I want it now and it will stop me staring at every other BTCC kitted Leon on the road, and looking on Bartlett's SEAT website.

Done the rear disks/pads today.

Might take the 'L E O N' badge off the back so that it looks cleaner and I can DA/Detail polish the tailgate better.

:10: That looks really nice Scott! :10:

Look what I've found with my friendly laptop........;).....

http://img.photobucket.com/albums/v9...ps53488827.jpg

That's some bonkers front wheel torque :)

SOLD

I'm sure the new 'temporary' owner will be along soon in the For Sale Section.
But only after it's 'ticked his box' and run out of fuel.
Being a Diesel it may take a little longer than usual.

lol, gone to Rob then?

So have you swapped it for something from Rob ????

Nope. Deal for cash......

Yep, cracking car and example. But yep for sale and looking to move it on if anyone was interested PM me.

Love the new ride Scott ;) enjoy, proper grown up car but still looks the bizz.

So what is the new car...