I know what you mean Scott I will need to have a good look and the long wait has come away to pick the car up on Monday .:yeah:

The journey begins at 3pm for the long drive to pick up Snow White .

Best of luck hope all goes well :)

Car now picked up looking forward to giving it a wash and start fitting the parts when I get home tomorrow.

:yeah:

No photos at midnight??

Was bloody to cold for that Nick will get some nice night pictures up soon .

Night photo of Snow White outside house waiting to get a good wash after driving up the A9 to Inverness
http://tapatalk.imageshack.com/v2/14...a9f523ef47.jpg
http://tapatalk.imageshack.com/v2/14...15cc921468.jpg

Excellent.

Glad it is with you now matey.

Looking forward to watching the progress.

Q1 . What paint to use when painting wiper arms as they need a freshened up
1. Normal rattle cans and etch primer
2. Hammerite smooth
3. Plasti-kote
Need a little help here guys .

I would use satin plastikote. Just give them a quick rough up with fine scotch brite or wet and dry first.

Cheers Scott no primer then ?

Q2. Speedo instrument , the needles you can hardly see in the dark , does anyone know bulb part numbers or what they look like so I can order some new ones .

Got a few bits fitted so far thank god I've got a garage
Engine bay before
http://tapatalk.imageshack.com/v2/15...d98e33ddee.jpg
Engine bay after
http://tapatalk.imageshack.com/v2/15...86426eee52.jpg

Done some more engine bay tidying again today
Coolant header tank lid
http://tapatalk.imageshack.com/v2/15...457412111d.jpg
Battery tie down bar
http://tapatalk.imageshack.com/v2/15...6c5ee2eaf8.jpg
Boost solenoid bracket
http://tapatalk.imageshack.com/v2/15...c089391c15.jpg
Tomorrow to do wiper arms and front bumper indicators some more engine bits again .

Well got alternator in today another bit ticked off my list
Ready for fitting
http://tapatalk.imageshack.com/v2/15...b3ac3220fd.jpg
Fitted bit of a pain but got it in
http://tapatalk.imageshack.com/v2/15...84d4ebebff.jpg
Having a little brake before I attempt to fit the rally flaps .

A little tip.......
Lots of newspaper, masking tape, remove the coil pack and vacum/boost pipes. Ram the newspaper under the inlet to protect from over spray and give it a good flick over with satin red plastikote.
Will look 100% better then a flakey manifold for the price of a can of paint.

Cheers for the tip Scott but already got a inlet to go on .

Bought some poorboys products ready to give it a wash this weekend and changed the front head lights and that's it for the moment will post a pic tomorrow of the front .

coming along nice!

This is what the front end looks like nice and dirty
http://tapatalk.imageshack.com/v2/15...ccf6292d93.jpg

Due to weather conditions in Scotland I can't wash my car so I am going for the dirty look and I know you's are not going to like it lol
http://tapatalk.imageshack.com/v2/15...69c6c1288c.jpg
http://tapatalk.imageshack.com/v2/15...3adffd23de.jpg

Looks spot on as it should be.....dirty rally slag

You need to at least rinse the salt off!:polish:

That's what I will be doing at the weekend Dave :polish::polish::polish:

Mine looks similar at the moment so don't worry too much.

This is the kit that I will be trying over the weekend will give my opinion after
http://tapatalk.imageshack.com/v2/15...8460250c5d.jpg

Getting the car into Mr Forrest for a alcatek ecu fitted and mapped before the ring .

Another upgrade part off the list
http://tapatalk.imageshack.com/v2/15...15cd5bf306.jpg
Alcatek ecu
SC40/42
That will be all the upgrade parts complete for the time being

I like all the Poorboys stuff I've used. Should bring her up a treat. :ok:

Looking good scott. Suprised you have not given the inlet mani a go.. Need to hurry up and pop down so we can fit it.

In time Tyler buying all the parts to go with it before I come down , that's what you are going to do for me while I stand about like a council worker with a brew and watch lol .

Ha ha ha, you can be my tea boy. Even though I don't drink tea. :lol:

:lol::lol:just make sure the Terzo's there I've got a present for her .

Well I need to put the revolution milleniums on hold as my P1 rims need a full refurb see if I can get that sorted on Saturday.

Well got some parts delivered today from importcarparts
http://tapatalk.imageshack.com/v2/15...c0c43211b3.jpg
Gaskets ready for the other inlet manifold just need to order a turbo intake hose pipe from samco .

:five:get some oz stickers off the p1 website for the rims once the wheels are done

Cheers Tim :doubleup:

Tim do you know the original colour code as I've got another 2 colours in mind .

Well off to the powder coaters tomorrow to talk colours and got another delivery some nice bonnet scoop bolts and nuts as I have one missing and some nice side lights
http://tapatalk.imageshack.com/v2/15...e475c214f6.jpg

Today I have order replacement OZ Racing wheel stickers from P1WOC form now I need to buy a low level trolley jack and axle stands lol as car is uber low hopefully the :wife: will be down next week so I can arrange a night slot with Peter for a drop off and pick up in the same night .