|
That is looking fantastic mate. Its a credit to you. Like the fact that the speedo runs to 180mph too!
|
Top job that man, it's looking the absolute business mate :ok:
|
Michelle wants to get into photography, so shes doing the 365 project.
Messed around with a old pic, and came up with this. :-P http://www.mortster.net/images/Wrap/SCoob.jpg |
Yer i like that, nice colours :ok:
|
nice
|
Had a few bits turn up over the past weeks. Suns out now..
And yes, they fit ok with a bug bumper. :ok: http://www.mortster.net/images/Wrap/walk%20077.JPG |
Very nice, did the flaps have to come off to fit them?
|
http://www.mortster.net/images/Car1/Difront.jpg
Changed the spliter, removed the mesh and fog lamp covers......and the Red flaps... Re-locating the plate, got a Audi plate holder from Ebay for 99p! Still a fewbits to do for this years look :-D Ive been on Wrongfitment crew alot.... |
I see it parked up in the usual place today and thought to myself it looked a bit different, thought i never noticed the fog lamps before lol
|
Quote:
loving the carbon wrap, wonder how much for the entire car??? And as for the red screws on the number plate could you not mask up to follow the white and red lines and get some enamel model paint and a small brush? i know id have to!:ok: Liking the toe sticker on the back never seen those before, not sure about the front one though. i look forward to seeing it blat past me on th M25.:yeah: |
Looks good mate :-)
|
Got these for a bargin. Need a service first, anyone know who can do these?
Apexi N1 Pro's. http://www.mortster.net/images/Car1/apecoil.jpg |
Wow nice bugeye,really good work matey,i really like:doubleup::10:
Jura |
A few taken by Michelle at the weekend.
Looking for some where industrial now for a few pics?? http://www.mortster.net/images/Car1/Brid.jpg http://www.mortster.net/images/Car1/Logs.jpg |
https://fbcdn-sphotos-a.akamaihd.net...97232976_n.jpg
Most recent pic of the car. Going to Dan at SSS on Thursday for some Gearbox/Clutch love, and the final Cat coming off. Bits to go on in the next few weeks, Apexi Coilovers, 255 Pump. Got Hawk Eye STI seats coming tomorrow, then being shipped off for a retrim. Spoilerless boot, for £30!!! Filled the holes, will be getting it wrapped to match the roof/bonnet. |
very nice mortster,much better without red mudflaps :10:
|
https://fbcdn-sphotos-a.akamaihd.net...42252828_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...81567097_n.jpg Bargin boot I got for £30 now Wrapped. Did my self, took hours, not bad for a first time. So in all, about £60.00 for a new rear end look. |
Turning into a nice Scooby that mate.
|
Looks great bit lower though ;)
|
looking good mate :doubleup:
|
looking good. I am considering doing the wrap on my roof as the clearcoat has stared to go off. was there a guide on the net that you looked at to find out how to do it ?
I've done window tints before, (Not great at it) so I guess it's a similar process? |
Do a few small bits first, you get used to working with it. I was up till 1.00 Sunday Morning doing it though, took about 4 hours. Peel abit off, smooth down, peel a bit off, smooth down...repeat repeat.
I got a sheet 3m by 1.5m for £40.00 from flebay. |
Made 255 af SRR Today, not bad for just a decat. Needs a Map and a few supporting bits now to push it further. :D
|
Quote:
|
1 Attachment(s)
Did this over the weekend. Very easy, already had the required different hand brake.
http://www.southeastscoobies.co.uk/v...1&d=1359572864 Just need to plastipant it now. Also finally replaced my cracked Pro-drive lights, was a mission, have learnt a lot along the way. It was much much cheaper than buying them from Subaru, for exactly the same part. Upgraded to HIDs while I had them out. |
Looks really good - have you tried the aircon/ heating yet? It works much better with the revised controls installed.
|
nice build that mate!!
|
|
jesus mate thats some blow you got there!! good excuse for a harvey trick pipe?
|
new one nick or weld it?
|
To far gone to weld, its all the way round. :cry:
|
Get on the blower to Alyn for a slip jointed Harvey pipe.
|
|
Spoiler less, dv less and now flangeless! Any more lesses possible in the Subaru community?
|
Seeing as I washed the car yesterday for Goodwwod this morning, I used some time finishing the insides this afternoon.
Hawk Seats, Dash and Door cards. Dash also plastidipped. :razz: Just need to get some new mats. http://www.mortster.net/images/Hella...130407_004.jpg |
That looks sweet mate! How much was the plasticoat??
|
Quote:
it looks good...been thinking of doing that to mine:ok: |
Need to redo mine, will be using the plasticote spray
|
After getting this, I decided to have a go at porting while it was all off.
http://www.mortster.net/images/Headw...Work%20(1).jpg Header Pre-port. http://www.mortster.net/images/Headw...Work%20(2).jpg Both sides pretty coked up, 10 years worth I imagine. http://www.mortster.net/images/Headw...Work%20(3).jpg Always get new ones, cheap from Japimportparts. http://www.mortster.net/images/Headw...Work%20(4).jpg With the up pipe, got a real STi one with no cat. Much easier to get in and out through that bloody small gap. http://www.mortster.net/images/Headw...Work%20(5).jpg Looked up a few images on Google, as long as you don't go beyond the ring of the gasket, its grind away. I took off a fair amount, and gave it a 45 degree angle as recommended. Smoothed it down as far inside as the dremel would go too, took the nasty burs off. One side has a big lump sat right be the port. http://www.mortster.net/images/Headw...Work%20(6).jpg http://www.mortster.net/images/Headw...Work%20(7).jpg http://www.mortster.net/images/Headw...Work%20(9).jpg And to finish, heat wrapped the up pipe. To get around the CEL light error, which comes on instantly, like the airbag mod, a 2.2k ohm resistor gets plugged into the socket. http://www.mortster.net/images/Headw...ork%20(10).jpg |
Love the progress. ... well done ill be taking a few ideas away. Thankyou
|
| All times are GMT +1. The time now is 02:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.