How are you mounting the turbo as doesn't look like a Subaru 'Flange'......loverly word that, almost as good as 'Moist'......

got my dash back from being flocked done a quick dummy up.

http://i162.photobucket.com/albums/t...-tone/dash.jpg

the end of next week the car is going away for the underside to be shotblasted and painted :)

Looking good Tone :mrgreen:

just brought another block ;) and some wisco pistons rings etc :
so there may be a 2.0 cdb for sale soon

EJ22t by any chance ?

*cough* Oi!!!!

Oooh, FIGHT! :-D

nope ;)

not sure you can aford it ian, its clean now! so its got to be worth aleast tripple :P

And to think I didn't charge you for picking it up, stripping it or storing it :rolleyes:

Never to late to send a bill !!!!!

dyney, IF i sell the cdb you will have 1st refuesel the same price you sold it to me so stop worrying! as i explaned by txt not sure what i am doing and not selling untill i do!

2.5 CDB with threads for SMG studs & its sitting at surrey !:whistle:

maybe :P

been very busy this week so after work tonight we striped the engine, suspension,petrol tank, doors ect as its going away tomorrow to be sand blasted to remove all the under sealer :)

http://i162.photobucket.com/albums/t...p-tone/016.jpg

http://i162.photobucket.com/albums/t...p-tone/012.jpg

http://i162.photobucket.com/albums/t...p-tone/004.jpg

also have subframes blasted aswell, so striped these down ready

http://i162.photobucket.com/albums/t...p-tone/010.jpg

http://i162.photobucket.com/albums/t...p-tone/008.jpg

That was a long night mate but looks like it was worth it. :doubleup:

Another long night in Jaffaville. Gonna be well worth it though mate. :cool:

mate you dont cut corners do ya!
its gonna be fantastic

Hope you can remember where everything goes!! :whistle:

Coolio!

Quality Jaffa, its going to be one fine scoob.
now pull your finger out and get on with it:mrgreen:

its at the worst point at the mo, so evreythink from now on will be assembling and putting it back together, should have it back in a week :)
http://i162.photobucket.com/albums/t...e/b8633037.jpg

http://i162.photobucket.com/albums/t...e/6cdad27f.jpg

http://i162.photobucket.com/albums/t...e/4dbfe2be.jpg

got tyres :)
http://i162.photobucket.com/albums/t...e/372fa26f.jpg

also went up to the blasters today to cut the front screen out, iam now looking at getting a heated front windsrceen so i can do away with heater vents/motor/matrix/box and wireing .

Mate, love those tyres, wish they did them in my size

They are proper blingy :cool:

got my block now its a 2.0 closed deck block linered to a 2.5

http://i162.photobucket.com/albums/t...e/438b594e.jpg

an a set of wiseco pistons
http://i162.photobucket.com/albums/t...e/a345fac5.jpg

Have you got a crank yet ?

not yet .. need crank,rods,cams,1 piece valves then the engine can be thrown together

rcm headstuds for sale at the mo so i can get smgs ones

Have some nitrated sti 9 rods with apr 200 bolts if your interested .

Picked the shell up this weekend, to say i was unhappy with the result was an understatment, they couldnt remove the undersealer all over as planed, the parts they did remove they primed, 3 of us today started the massive job of scrapping the undersealer and prepping by hand :(

http://i162.photobucket.com/albums/t...e/e1fe6316.jpg

http://i162.photobucket.com/albums/t...e/d677f2b5.jpg

http://i162.photobucket.com/albums/t...e/4e1e0e67.jpg

http://i162.photobucket.com/albums/t...e/739ae4e0.jpg

So why couldn't they remove the underseal by sand blasting?

I hope you didnt pay them too much.:doubledown:

Bloody hell mate looks like a job & a half :shock:

That looks like it's going to be hard going, good luck!
What are you going to do with it when it's bare metal??

i didnt pay anythink!!

when all underseal off will be primed and panited white :)

Bit more weight saving then!!, won't be driving it in the rain then!:nod:

also i have now sorted fuel pump plate an made some neat holes.
http://i162.photobucket.com/albums/t...e/0b953acd.jpg

still playing about with the custom wiring loom iam removing all the unnecessary wires (i hope it all still works its not my strong point ;)
no radio,heaters,elecric windows,mirrors,central locking interior light abs aircon,airbags etc
http://i162.photobucket.com/albums/t...e/d1bc4495.jpg

had the subframes an diff support sand blasted and primed
http://i162.photobucket.com/albums/t...e/c038a6b4.jpg
now painted
http://i162.photobucket.com/albums/t...e/1cdfee44.jpg
re-bushing the suspension using powerflex bushes, hopfully here tomorrow from demon tweaks.

Now thats Jaffa Style :doubleup:

I picked up my twisted kit yesterday, a drive to manchester an back with a slight hang over seem to be driving for years!!. Quality tig welding well worth the trip up there.

Hes made this all custom so i have plently of clearance for 6 speed gearbox also so i have enough room around my fuel rails, iv also had the center section modified to full 3inch.

http://i162.photobucket.com/albums/t...e/56d417af.jpg

http://i162.photobucket.com/albums/t...e/d51ad5fc.jpg

http://i162.photobucket.com/albums/t...e/f4b69aa9.jpg



Also managed to get hold of some windey windows out of an RA i can now ditch the electric motors :D The plan for the rears windows to make some brakets up to hold them up permanently, Also managed to get some fiberglass doors!!
nice an simply window winders!!
http://i162.photobucket.com/albums/t...e/098f47a6.jpg

still been sorting out the mess of a shell, cut quite a few brakets and a few unnessasery double skins, the most noticeable one to the eye is the pitch stop mount bracket.because iam running group N mounts i can now ditchit all together http://i162.photobucket.com/albums/t...e/2d97669c.jpg

http://i162.photobucket.com/albums/t...e/262136ae.jpg

still waiting on suspension bushes got whiteline lower balljoints an track rod ends
http://i162.photobucket.com/albums/t...e/a4420e70.jpg

Looking good mate...
Love the orange bits for underneath

Coming along real nice mate...