Help please. What is this?
As above, when inspecting the rear brakes I've found this is cracked. I can't find out what it is or what it does. So any ideas, and is it going to cause problems if I don't fix it right away? http://i1237.photobucket.com/albums/...37B9BFEC90.jpg
Thanks, Paul. |
Looks like the ABS ring.
I'm no expert though! |
Agree, looks like the ABS ring and it's about to loose a chunk. May of been damaged whilst trying to remove/leaver out old brake shoes.
It needs a repair or replace as it will cause ABS faults or even jam in the drum assembly if it falls off. |
If its still working ok, no abs light or anything..... give it a clean and stick it together with some epoxy putty
Dont use the putty on the notched side, just along the top bottom and back... It only spins round for the sensor to read, no load or anything...... so repair the crack, saves removing all the hub etc etc and makes a cheap fix |
Cheers lads. I might've damage it knocking the old disc off I suppose. It was a bit of a pain to get off, and must've been catching on the shoes as it pulled the rusty retaining pins off. I'll have a look how much they are as my wheels won't be back till the 6th.
|
Quote:
Did you pop a screwdriver in the little 'window' round the back of the hub assembly? There is a rubber bung/grommet that covers access to the adjuster, it (the adjuster) can be moved with a bladed screwdriver and free off the shoes from the inside of the disk. Couldn't remove my disks until I did this but it's a right pain and very awkward, especially if you adjust it the wrong way! |
Quote:
|
Quote:
I can only guess a lip on the inside of the disk pulled the shoes away with the disk in to the abs ring, the ring taking brunt of the force as the disk was forced off with the shoes caught up it? |
seen it many times and its the "tone" ring you have damaged by not releasing the h/brake adjuster..............
you need to split the hub and bearing to replace |
Quote:
|
So when trying to fix the tone ring two pieces just fell off in my hand and I ended up with this.
http://i1237.photobucket.com/albums/...DDF29A03A4.jpg Oops! But with some adhesive, epoxy metal putty and some little modelling files I managed to get it to this. http://i1237.photobucket.com/albums/...D98FE49106.jpg Now to my eye it looks bang on. So hopefully it'll hold together ok and be good enough for the sensor. That I won't find out till the wheels are back on. On the plus side my brakes are all finished and back on the car and just need bleeding. |
Looks okay in the pic.
It's not a part under stress/load, so fingers' crossed it'll work for you. Saves some faff if so! |
Quote:
I would not want to go even up to the speed limit, let alone going to somewhere like the Ring, which Willowsdad has mentioned an interest recently. |
It's pretty well stuck together. I'm more worried about the readings the abs will get if its not exactly as was. I'm sure any problems would show up soon enough. Most it might get put through this year is a brands taster day.
|
Quote:
|
ok for a temporary fix...id be buying new one if it was me...:oldman:
|
Quote:
|
All times are GMT +1. The time now is 06:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.