Project Terzo 112
 

As you are all aware I've have purchased a nice clean Terzo so I am going to start a wee a project thread of what I will be doing to it anyway today I have just order a set of yellow 440 injectors so now the slippery slope begins once again lol .

On a mission just ordered a TD05 16g second hand and it's getting sent straight to John at BRD to get converted to front entry and if he can change it to billet that will be getting done as well and give it the once over to see if any other parts need replaced .

Cerrrrrching !!! :lol:


Good luck with your project...:nod:

First part of the puzzle arrived today .
http://img.tapatalk.com/d/14/05/13/veretuge.jpg

Just sent Mart at Lateral performance how much it would cost to reflow the injectors and just been looking at getting a carbon bonnet vent to replace the one it and buy another set of gauges to replace the ones that are in it .

Done it again just ordered this
http://img.tapatalk.com/d/14/05/14/ga2ybepe.jpg

Just been talking to Kris at Highland Performance Development in Inverness about 330mm ksport 8 pot brake kit set up with Fedro DS2500 pads Got a good deal at £1000 delivered so time to save a bit of money for the next 6 months but I will go and pick them up as it's only a 5 min drive from my house .

Have you got some pics as she stands now to compare to the later finished project :)

Yes look on show and shine and look at first wash that's what she looks like now as collecting parts as I go along then when I get back home that's when I will start taking pictures of before and then after pictures as and when I start to fit the parts mate .

Just had a look that's a really clean looking terzo :-) good luck with the project mate

Well John at BRD has received my TD05 16g he is going to convert it to front entry and also going to do a big 16g billet conversion I wonder how much bhp that will produce once he's done his work to it .

340 with supporting? (stabbing in the dark a little) ;)

I think that will be enough bhp for me until I get another engine next year lol .

Everything is coming along nicely just bought sti8 short block with 49k from a engine builder in Aberdeen just need a set of sti4 heads to go with it .

;) I might know where a set is sat ;)

Might as well call you a part shop Dave lol .

FMIC now sorted , bidding for a set of 550 injectors on eBay , now need to find a decent clutch that is good for up to 450 but won't be going that much might need some help on that one .

These parts arrived today my list is getting small but still got a long way to go
http://img.tapatalk.com/d/14/06/09/abu4aqys.jpg
http://img.tapatalk.com/d/14/06/09/u5e8enet.jpg

Can't beat new parts arriving :norty:

Do I need to key my FMIC core before I spray it so the paint has something to stick to as going to use primer first before painting it .

:doubleup: i really want to go fmic....how much was this kit mate???

And what colour is the gear knob ? Any links to where it came from

The colour of the gear knob is what the picture shows and it's a skunk2 gear knob which can be found on eBay and skunk2 website .

Well I've started to paint the core this is in primer stage just waiting for it to dry http://img.tapatalk.com/d/14/06/19/qajajazy.jpg

Cheers Scott ,, ill go look

That's the core now painted Matt black not a bad job for first time so here is the finished core http://img.tapatalk.com/d/14/06/19/3uba4a4u.jpg

Going to have to take a trip to halfords to some more spray paint for the pipe work and some more tools like a dremmel to finish off cutting the bumper away and a drill so I can mount the core .

Not a bad way to use a old chair pipe work has been spray Matt black then a tin of lacquer let them dry .http://img.tapatalk.com/d/14/06/19/rydy3u5e.jpg

Good job, though I'd just hang it on the wall in your lounge as it looks so nice!

Looks great .... when's your creation on display at the Tate Modern? :-P

Your missus is going to go bonkers when she sees that chair! :wife:

Bloody snapped three metal blades trying to cut front bumper support bar another trip to b&q again I will get the FMIC fitted .

Looking good so far Bud, its nice to see another Terzo being looked after!

liking the black fmic pipe work looks smart

Ordering new short block tomorrow so that's my budget used up for this month don't want to use my plastic friend yet .

Just order x3 52mm prosport gauges should arrive tomorrow or Friday .

Well just finished putting new front bumper support bar on car as well fitting FMIC and pipe work , also fitted new prosport gauges with the help of my two good mates but need to finish wiring the gauges to the lights to change the colour so that will get done today then we will start work my mates EVO6 GSR . Will take some photos of what has been done so far once its had its wash and polish .

A bit of a set back took the car for a drive to make sure everything was good until oil dropped from engine found the source sender running from the plug in cylinder 3 is leaking big time so order a new complete sender unit with plug which arrives tomorrow so be fitting that then check oil levels replen with new oil take it for a test drive to see if there any leaks fingers crossed on that one .

Well got a lot done today so here is the progress so far
http://img.tapatalk.com/d/14/07/08/yge9ymeq.jpg
http://img.tapatalk.com/d/14/07/08/e7e4eduh.jpg
http://img.tapatalk.com/d/14/07/08/uvu9yham.jpg
http://img.tapatalk.com/d/14/07/08/y3y7uhu4.jpg
http://img.tapatalk.com/d/14/07/08/jugazuty.jpg
http://img.tapatalk.com/d/14/07/08/3aha2y7y.jpg
http://img.tapatalk.com/d/14/07/08/2yva9ady.jpg
That's it for now

Nice one mate. Coming along really well.. whats next on the cards?

buying a set of stiv4 heads from Dave aka(Ginola) to go with my stiv8 short block and a stiv4 orange maf and apexi induction kit .

Nice one Scotty. When and if I get a chance I will try and knock you up some of those number plate brackets, as ideally you need to get that number plate away from blocking the airflow to the inter cooler.

Cheers bud I was just going to take it off and put it in the car for now as I need to order a square number plate .

Not done much to the car but just found one of the boys is selling a brand new stage 2 competition clutch and also a set of 18" rota drifts .

Looks like you'll be having a busy start to your retirement ;) What colour are the Rotas?

Been powder coated white .

OK, like mine now ;) They're a bugger to keep clean :p

I know but I hope 18" 8.5-5x100 ET44 fit without doing any mods to the arches .

http://tapatalk.imageshack.com/v2/14...7ebd2103de.jpg
http://tapatalk.imageshack.com/v2/14...87babbe5cd.jpg
Ordering these next and side skirts to match once Tim at ralleytec has got them made .

no no no, please don't