Track Scoob
As some of you know I building a track Scooby. I've got a engine sorted, so I'm now looking at a gearbox, I want to go 5 speed. So any ideas as to which one I should go for. Also I'm thinking that the mass airflow may need to be upgraded, any views on this as hoping to get 450 to 500 bhp
|
5 speed at that power..ppg gearbox
|
Whats the full spec?
|
5 speed would need to be PPG, Albains or Elite.
|
ej22 block got a 2.35 Stroker kit coming. V4 heads 440 yellow injectors, sti inlet manifold with 5 injecter
|
Who is building engine?
|
I would have thought you're going to need bigger injectors for that power unless you're getting the yellows reflowed...
|
Even a PPG will be hit and miss at the power, mine survived at 450bhp for a year and then died with someone else at 400bhp
6 speed for me |
If you go 5 speed ppg @ that power you best buy two :D
|
as above yellow injectors will get you to mid 300's at best..........
|
so injectors , would the red 850cc be ok.
|
As for the gearbox I'm in contact with elite to see what they can come up with
|
iv got some 740cc injectors modded my mark @ latreal to 800cc if intrested,
As for air flow sensor, buy a decent ecu that dosnt need air flow sensor (syvecs) |
I'm not sure who to build it.
|
Quote:
|
Where in Thanet are you?
|
The village of minster
|
Not far from me at all then!
|
Quote:
|
Birch
|
just down the road then. Do you know anyone who can build the engine
|
All times are GMT +1. The time now is 08:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.