South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   Projects (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=22)
-   -   The White One (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=14306)

Crowman 08-06-2012 12:35 PM

The White One
 
Be warned this thread is likely to run for a year or more.

The white one is now off the road and stage 1 of the refresh is under way.
A forced refresh due to problems with plug thread in head.

The rough plan is
1. Engine out and full strip and refresh
2. strip out engine bay and paint
3. strip entire body
4. send rolling shell for paint
5 refit all body parts and fit engine
6 sell to Pieman

I have made a start with removing engine, basically just getting bits off. Now ready to undo engine to gearbox bolts, Fuel Lines, down pipe and a few little bits and peices, then engine can come out.

http://i376.photobucket.com/albums/o...s/3376f3fd.jpg

http://i376.photobucket.com/albums/o...s/bc417947.jpg

http://i376.photobucket.com/albums/o...s/3f80b345.jpg

http://i376.photobucket.com/albums/o...s/19df09cd.jpg

http://i376.photobucket.com/albums/o...s/69b4123a.jpg

http://i376.photobucket.com/albums/o...s/383c3ea4.jpg

http://i376.photobucket.com/albums/o...s/6bc9957b.jpg

http://i376.photobucket.com/albums/o...s/16dcce26.jpg

Anger 08-06-2012 12:47 PM

Good luck and if you need any help along the way, let me know :)

Tomma 08-06-2012 01:12 PM

Good luck this will be good to follow :-) again if you need any help then...... I'm good at making Tea!

Nige 08-06-2012 02:00 PM

About time you got that RUST sorted. Good luck with it mate. :wink:

thepieman 08-06-2012 02:05 PM

Quote:

The rough plan is
1. Engine out and full strip and refresh
2. strip out engine bay and paint
3. strip entire body
4. send rolling shell for paint
5 refit all body parts and fit engine
6 sell to Pieman
Should be:

1 Sell to Pieman
2 come with me to drop it off at RCM
3 come collect it when it's done


:ok:

BIG"E" 08-06-2012 02:12 PM

Quote:

Originally Posted by ThePieman (Post 135969)
Should be:

1 Sell to Pieman
2 come with me to drop it off at RCM
3 come collect it when it's done :ok:

Now that sounds like a plan.

Guy B 08-06-2012 02:15 PM

Good luck with this Martin, will be following this with interest, more than happy to lend a hand if required :ok:

Scott.T 08-06-2012 02:16 PM

Is it gonna be painted the right colour this time ??

worzel 08-06-2012 02:20 PM

Good luck mate.

I would lend a hand, but I basically ........... can't be arsed :whistle:

You know where I am Captain Gaspants :ok:

thepieman 08-06-2012 02:28 PM

Quote:

Originally Posted by worzel (Post 135977)
Good luck mate.

I would lend a hand, but I basically ........... can't be arsed :whistle:

You know where I am Captain Gaspants :ok:

He may need you for the heat gun processes:paranoid:



:whistle:

munk 08-06-2012 02:30 PM

Goodman!! Will be keeping a keen eye on this thread!

Mad Paddy 08-06-2012 05:06 PM

will be watching this, all the best with it martyn

Skullfudge 08-06-2012 05:09 PM

All the best mate.

Will be worth it :doubleup:

AndyWRX 08-06-2012 05:11 PM

Good luck with it mate, look forward to the ongoing updates :-)

Mad Paddy 08-06-2012 06:27 PM

hope your going to start a thread on the woc

Crowman 08-06-2012 07:16 PM

Quote:

Originally Posted by Mad Paddy (Post 136004)
hope your going to start a thread on the woc

I already have mate , that was up first :-)

Mad Paddy 08-06-2012 07:29 PM

Quote:

Originally Posted by Crowman (Post 136012)
I already have mate , that was up first :-)


having a grey monent:smile:

Crowman 09-06-2012 08:04 AM

Thanks for offer of help guys .
Very likely I will calling upon you at some point

Crowman 09-06-2012 08:04 AM

Thanks for offer of help guys .
Very likely I will calling upon you at some point

SpecB 10-06-2012 06:48 AM

Martyn, as this is going to be a big one is it worth splitting your posts to one thread and comments in another to keep it clean and easy to follow? should be a great thread about the restoration of an important car and knowing you it will be done right.

Crowman 10-06-2012 08:49 AM

Quote:

Originally Posted by BlueBugEye (Post 136115)
Martyn, as this is going to be a big one is it worth splitting your posts to one thread and comments in another to keep it clean and easy to follow? should be a great thread about the restoration of an important car and knowing you it will be done right.

Hi mate, yes i was thinking that , will have a tidy up and sticky this one .
Be warned though its going to be a long project :-)

SpecB 10-06-2012 05:10 PM

Wish I'd done mine in more detail and created the blog I planned to!


All times are GMT +1. The time now is 12:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.