Newbie In West Sussex with Hawk eye WRX
 

Hi All,

I've Been browsing around looking to pick up tips with my new motor, had it a few weeks and looking to sort out last few niggles now it's had the important bits done.

Got a nasty dent right in the crease of the boot lid it's 06 saloon.
Rear bumpers scraped on both sides
couple of dints in each front door
couple of patches of lacquer

other than that there's an annoying squeak since I had the water pump, cam/aux belts changed that goes away with a slight bit of pressure to the clutch pedal



This site kept on popping up here there and everywhere that's why I'm here now. I apologise in advance if the above space shouldn't have been for my moans!

Lou :thanx:

Hi and :welcome:

Hey welcome - im new to here and scoobs as well but good bunch here !

what colour is your hawk ? ,, I got a few dints on my doors so looking around for some in right colour at ight price and condition ,,, seems to be plenty of good used spares around for scoobs which is a bonus

best guy around here for problems is stuart and john - http://www.eastsussexmobileservices.co.uk/page2.htm

been using them for years on and off and often a specialist is worth their weight in gold

Welcome in :-)

Hi there :wave: and :welcome: to SES.

Hi :welcome: to SES :wave:

Welcome :wave:

Whereabouts are you in Sussex? There are several scoob specialists in the area, might help us point you in the direction of your nearest :)

Bootlids are easily swapable if you can find another one in the same colour.

Welcome.

:yeah::yeah::yeah:



No pics means it doesn't exist. Get it sorted :fight:

:wless:

Hi and welcome to ses.

welcome

photograph the rear bumper scrapes, depending on how bad they are Banstead Stig's method of correction may work

Hi & :welcome:

Looks like im off to collect four doors in the correct colour for mine at £20 each on thursday ,, guy says hes polluted with body panels that arent selling so if the op posts up his colour i can defo see if this breaker has what he needs

Hello and welcome to SES :-)

where be that breaker?

this is the thread - hes actually got five doors up there in the right colour for me at £20 a pop - http://bbs.scoobynet.com/subaru-part...nce-parts.html

Hello thanks for the welcoming messages.

You'll No doubt be hearing a lot more from me :sos::tumbleweed:

Hi oldskool

It's blue (forgive me I've not checked the colour code yet) they're pretty tiny and a bodyshop freind said paintless dent removal will do the trick 50 squid a dent, not sure yet though
I've not really been actively hunting yet just getting over the hit for buying the car, service cam belt tyres etc (Well and the upcoming holiday too!)
Cheers for the shout if I need some specialist hands I'll give them a bell.

E1_G

:welcome: to SES fella ;)

Evening Steve_PPP

I'm quite near Gatwick, was told about Japanese performance parts up in Crawley not spoke with them yet though.
I've seen a boot lid from a 02 Bug eye but wasn't sure if a direct swap AND it's got extra holes for the STI spoiler, it's dirt cheap though so might be worth having as a temp if I do get mine body shopped.

E1_G

Cheers Ginola,

I'm not to far so I may be an object distant in your rear view at some point

:SM:

Hey NorthDownsScooby,

Well you asked for them... a stock Hawkeye a little dirty too :-|.
that's why I was holding off! :oldman:

http://i28.photobucket.com/albums/c2...ps1c6de251.jpg

http://i28.photobucket.com/albums/c2...psad8d9b77.jpg

Apologies to Admins if the resolutions are incorrect :oops:

E1_G

Hey riiidaa,

Cool will do in the light, what's a rough idea of the magic then?

E1_G

Hi Oldskool,

Nice one, where you picking up from? it's more the boot lid and bumper than anything, but not rushing to be fair.

E1_G

Its somewhere near manchester ,,, he says hes got a bootlid for me as well ,, mines the same colour as yours ,, 02c if im correct ,,, ill see if he has a rear bumper for you

A bugeye bootlid will fit (they're the same shape) but you want to find a later one. They changed the lock style in about 2004 - the older bootlids had a smaller round lock and the later ones had a square lock. If you get an earlier one, you won't be able to transfer your lock across and hence won't be able to open it with your key ;)

waffle pad, and a Farecla G3 product that someone recommended to him
http://www.surreyscoobies.co.uk/foru...ad.php?t=49102

Cheers mate,

And another boot lid :) when you heading up there?

E1_G

Cheers Steve, Yeah I noticed that. this one looks like it has the rectangular hole :S. I'd rather have no f-ing lock on it so when dumb **** friends open it with the keys left inside...

Cheers Riidaa,

The're right down to the plastic, probably still look better less the scuffs though.
what you think?

http://i28.photobucket.com/albums/c2...psec2c8d18.jpg

http://i28.photobucket.com/albums/c2...ps3f21d777.jpg

E1_G :worthy:

Looks a good project:welcome:

yup in the short term descuffing as much as poss would help, but ultimately it'll need spraying

Hello and Welcome :wave:

Hi and welcome