Most people show the other side Scotty, not the exhaust side :)

Sorry james did i put the wrong pic up 😂😂😂😂
Well lets see how this performs thanks again for finding it what would i do without you 🤗🤗
https://uploads.tapatalk-cdn.com/201...a72b4e4219.jpg
https://uploads.tapatalk-cdn.com/201...889dbc0d34.jpg

Sent from my SM-G920F using Tapatalk

Well today i started on making my custom 52mm gauge pod and this is where am at now 😊😊😊
https://uploads.tapatalk-cdn.com/201...d90ae8e27a.jpghttps://uploads.tapatalk-cdn.com/201...6d1a63e161.jpghttps://uploads.tapatalk-cdn.com/201...3207fcef19.jpg

Sent from my SM-G920F using Tapatalk

good effort...

Cheers well its getting there gave it a quick paint needs a few tweeks to get it perfect then its done .
https://uploads.tapatalk-cdn.com/201...406611f0b0.jpghttps://uploads.tapatalk-cdn.com/201...e26cc9df9e.jpghttps://uploads.tapatalk-cdn.com/201...b3c0ee41ae.jpg

Sent from my SM-G920F using Tapatalk

:10:

how will you block the heaters?

Im not i dont use my heaters unless its for the window on feet :ok:

Postman was early today dropped off a nice heavy parcel 😊😊😊
https://uploads.tapatalk-cdn.com/201...f951b3a05d.jpg

Sent from my SM-G920F using Tapatalk

i thought all year round up there the heaters are on lol

This was what was inside the box decided to buy a set of newage sti rear r180 hubs 😊https://uploads.tapatalk-cdn.com/201...fe92f94e0d.jpg

Sent from my SM-G920F using Tapatalk

Haha not that cold when wearing a fleece :-D

Not to everyones taste but looks good on the r a freebie set of stickers from my guru x2 for the car and x1 for the toolbox
so decided to fit stickers to car not in youre face just right 😊😊https://uploads.tapatalk-cdn.com/201...7b7f114fb0.jpghttps://uploads.tapatalk-cdn.com/201...968713be73.jpghttps://uploads.tapatalk-cdn.com/201...7c44442698.jpg

Sent from my SM-G920F using Tapatalk

Looks like i need new rear lights as they seem to fractures on the inside and cant remove reverse light bulb due to it been welded in with rust not bad for 20 year old **** box 😂 not in a rush to buy them .
https://uploads.tapatalk-cdn.com/201...f474584112.jpghttps://uploads.tapatalk-cdn.com/201...ab5ce8f7a3.jpghttps://uploads.tapatalk-cdn.com/201...0ad40c2c57.jpg

Sent from my SM-G920F using Tapatalk

Good progress dude all in all....

Looks like those light may have leaked a bit to make the bulb fitting rust like that!

One of your window stickers is not straight!


Sent from my iPhone using Tapatalk

Yes they are :-D

Exact same thing happened on my wife's classic Subaru,the bulbs were blown and when she went to change them they had rusted themselves completely to the bulb housing...so she is going to save up for brand new STI light units.SJ.

I get a discount on importcarparts SJ so thats the route im going new aswell .

Discount you say:wink:Is it one you can pass along?.SJ.

Nope sorry .

Well finally finished my custom 52mm gauge pod so sent it off today to be dipped cant wait to see the results heres the box lol also i was board so did a display of my new orniment lolhttps://uploads.tapatalk-cdn.com/201...f86522bd56.jpghttps://uploads.tapatalk-cdn.com/201...b3856fe516.jpg

Sent from my SM-G920F using Tapatalk

What size is ur ornament? Pmsl

Not big enough :lol:

:angst:

Just took delivery of a nice big box 😃😃😃
https://uploads.tapatalk-cdn.com/201...9d56e50829.jpg

Sent from my SM-G920F using Tapatalk

This time im fitting it not letting this one go 😁😁😁
https://uploads.tapatalk-cdn.com/201...ef415a04ab.jpghttps://uploads.tapatalk-cdn.com/201...8ee960cb24.jpghttps://uploads.tapatalk-cdn.com/201...a20d091015.jpghttps://uploads.tapatalk-cdn.com/201...3f11ad3117.jpg

Sent from my SM-G920F using Tapatalk

Nice and shiny :ok:

For now until i paint the core black lol .

Only lightly dust it on the fins, go mad on the end cans if you wish!

Use the Eastwood radiator paint from Frosts Automotive.
http://www.frost.co.uk/eastwood-radi...k-aerosol.html

Less impact on Intercooler efficiency and very long lasting compared to standard satin blacks.

:) this :)

I will just use standard halfrauds standard satin black as the one i have on the moment still looks good from my painting techniques:-D

Yup another delivery today any guesses
😂😂😂
https://uploads.tapatalk-cdn.com/201...4a599e0992.jpg

Sent from my SM-G920F using Tapatalk

The issue is you'll need to touch it up too often and risk getting too think a paint layer on the fins, thereby reducing the efficiency of the intercooler - The Eastwood paint lasted 5 years on my Bugeye without needing a touchup - the satin black on my front grille was destroyed in about 2 months.

Plus without priming (more paint layers) you will find the satin black doesn't take as well as the Eastwood will on bare metal.

Do it once, do it right!

I reckon you're building the first ever cardboard Subaru.

Funny you should say that heres a clue
https://uploads.tapatalk-cdn.com/201...16e5800c9b.jpg

Sent from my SM-G920F using Tapatalk

scotty's engine build....

https://static.carthrottle.com/works...9bca98888e.jpg

:lol: :lol:

:10:

I'm guessing that's a new set of rear lights, make sure you seal them properly when you fit them.