Fitting Front Wishbones bushes on a Classic?
 

Hi everyone,

I have a Classic STi v2 (1995) and I have just replaced drop links front and back, rear ARB and ARB bushes front and back. I'm now looking to replaced the front and rear bushes on the front wishbone. Car is used for normal driving - no track days.

This is what I'm hoping to buy. Please offer suggestions, if there's a better option.

http://www.polybush.co.uk/shop/view/...one_Front_Bush
http://www.polybush.co.uk/shop/view/...bone_Rear_Bush

Fitting.

• Do I need to remove the wishbones completely from the car?
• Will I need a machine press to remove the front bushes and replace?
• The rear bush is more straightforward and I only need to remove a few bolts to replace?
• Do I need to get the wheel alignment re-done after fitting?

Thank you,
Iceman_II

not only can we supply far better quality components (IMO) but they also work out cheaper than those listed above...................

and yes you will need to take the w/bone off the car to sort in a press and also have the alignment at least checked on re-install

alyn
0191-4103770

Thanks Alyn,

Can you add the details to this post or PM me your prices? Thank you.

dont have them at home office and will forget in the next minute as too much stuff going on :whistle:

would you mind dropping me an email and i'll sort in the morning from work........