ECU pinouts my97
Ive just purchased myself an apexi power fc for my 97 impreza turbo.
however i plugged in the ecu amd it wouldnt start my car. Everything turned over just didnt fire up. i noticed that my fuel pump didnt prime. Any ideas? And does anyone have the pinout for me. |
Anyone?
Need to know which i need to change over for my apexi power fc. |
You shouldn't need to swap any wires for the fuel pump to prime, which version of the avcr did you buy? and do you have the commander
|
You need to move the fuel pump wire on a 97/98 UK ECU if fitting am Apexi.
|
Quote:
didnt realise, did not have to on my 98sti |
Move B137 Pin 17 to 7 or via versa. Whichever one has a missing pin.
You can release the crimps from the connector with the end of a jewlers screwdriver or heavy duty paperclip to release the plastic retaining latch for the crimp. If the fuel pump primes but it still doesn't start you may also have to swap B136 Pin 8 and 10 for cam and crank. Although I don't recall having to do this on a 97/98. But it was a long time ago. Cam and crank do need doing for 99/00 but not pump. Will post image of connectors later |
|
B137 is the biggest connector.
Make sure you count the pins from the correct end and double check orientation/pin layout matches the above. |
You do need to swap cam and crank.
I did a little Google and found this little gem : http://www.scoobynet.com/general-tec...ont-start.html |
As I have been asked Apexi fitting questions twice this weekend I have added a sticky thread here : http://www.southeastscoobies.co.uk/v...ad.php?t=20819
|
Diamonds..... thankyou. No commander but i was given the ecu. So just wamted to see if it works before i spend any money on it
|
Quote:
http://www.fc-datalogit.co.nz/ |
Mine doesnt have connectors in either 7 or 17
http://i1311.photobucket.com/albums/...pssjnxyucz.jpg http://i1311.photobucket.com/albums/...psesonfcbh.jpg |
You need to move 17 to 7
It has one in 17. You are counting from the wrong end. The image on the diagram is as viewed from ECU not the mating connector. If you look at the diagram the connector has a block of 4 one end and 6 the other so orientate the plug the same way. |
Bottom row 4th from left is pin 17
|
Top row 7th from left is 7. The hole directly below the latch.
|
Oooh. That makes sence haha. Thankyou.
Ill atrack it in 5 minutes |
All times are GMT +1. The time now is 01:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.