Modding my UK Terzo
2 Attachment(s)
As i have spent a lot on my forged P1 engine already, i thought it was time to spend a little on the inside of the car as i feel it looks quite dated on the inside. Have had the screen for months but was not looking forward to fitting it. But got there in the end over the x-mas period. What a nightmare...
|
Very nice mate, I have the same head unit, must say i'm very impressed with it
|
Quote:
|
Quote:
|
Quote:
|
Mate, it's looking the nuts!
8-) 8-) 8-) 8-) |
Cheers Worzel... :D
|
3 Attachment(s)
I reconditioned the 4 pots i brought months ago and fitted them with braided lines and drilled and groved discs, was a little long winded to fit and bleed on my own but got there in the end.
Also took the car upto see simon and had a remap. Car made 333bhp and 325lbs... So happy with that. |
Modification list at present..
Forged P1 engine, wiseco pistons, forged conrods, forged billet crank. Cometec head gasket (tripple layer) Sti 4 Heads ARP Head studs Titanium Valve sprins & Alliminium retainers Prodrive 3 port boost solenoid Front mount intercooler Sti Strut brace Carbon altonator and air con covbers 8000k Hid's Facelift front bumper 18" Kato rims Prodrive WR spoiler STI mudflaps 4 pot front brakes Braided lines Drilled and Groved discs Apexi Springs Powdercoated Inlet manifold VF28 Turbo Tien bonnet lifters 3" system turbo back 440cc injectors Simtec Ecu Kenwood doble din screen With Nav and bluetooth hands free Alpine digital stack 4 channel amp Rockford forsgate digital mono block amp Rockford 12" Titaniam dual voice coil exabition sub (1000 w RMS) PowerAcustic tweaters Alpine type R components O gauge wiring kit I think version 5 centre console to fit the double din screen Engine remote start and pager alarm with built in turbo timer Centre console to hold gauges (boost, oil temp and oil pressure) STI 5 bonnet scoop.. And many more to come.. |
Fitted new grill of a my99, new face for clocks and fabricated some brackets and fitted number plate Evo style.
Clock face http://i1221.photobucket.com/albums/...10226-1720.jpg One of the brackets i fabricated... http://i1221.photobucket.com/albums/...10227-1400.jpg Fitted to fog light cover... http://i1221.photobucket.com/albums/...10227-1428.jpg Fitted to car.. http://i1221.photobucket.com/albums/...10227-1457.jpg Number plate and grill fitted, and old number plate cut off... http://i1221.photobucket.com/albums/...10227-1516.jpg |
Looking good matey
|
Like that numberplate braket idea :)
|
Cheers guys...
|
Just purchased a Prodrive pipe off a WR1 for a bargin should be here this week.... :D
http://i1221.photobucket.com/albums/...41_by_s4bb.jpg http://i1221.photobucket.com/albums/...20_by_s4bb.jpg http://i1221.photobucket.com/albums/...50_by_s4bb.jpg |
Looks good mate
|
Cars looking great buddy, nice work:doubleup:
|
Looking really nice mate. :drive:
|
Cheers guy's more to come once i sell some parts :D
|
Today my Prodrive exhaust arrived, So i drove home and fitted it on my lunch.... :lol:
http://i1221.photobucket.com/albums/...0325-00002.jpg I love it, just wished it popped and banged little louder as i had the car mapped to pop and bang... But fingers crossed when the anti lag is fitted that will change... :D |
Picked up my seats on friday and fitted them.... I know everybody has either already seen or has these seats but i love them.....
http://i1221.photobucket.com/albums/...0528-00130.jpg http://i1221.photobucket.com/albums/...0528-00129.jpg http://i1221.photobucket.com/albums/...0528-00131.jpg |
very nice :doubleup:
STI7 seats are the business :nod: does the newage rear bench fit straight into a classic then?? |
look great, suit the car perfectly
:10: |
Quote:
Quote:
Just been watching videos of you guys in Germany, Pete showed me them... Looked like you guys really enjoyed yourselves... |
Well after not that long fitting the Subaru 4 pots, i decided that i needed a lot more stopping power so i brought myself a set of these...
http://i1221.photobucket.com/albums/...0625-00025.jpg http://i1221.photobucket.com/albums/...0624-00020.jpg Brakes fitted as well as my prodrive wheels.. :D http://i1221.photobucket.com/albums/...0813-00064.jpg http://i1221.photobucket.com/albums/...0813-00061.jpg Wheels sprayed and fitted.. http://i1221.photobucket.com/albums/...24-00165-1.jpg http://i1221.photobucket.com/albums/...24-00161-1.jpg http://i1221.photobucket.com/albums/...1224-00173.jpg http://i1221.photobucket.com/albums/...1224-00167.jpg Also brought Gearbox (which came with lightweight flywheel) and rear diff... http://i1221.photobucket.com/albums/...1218-00146.jpg Gearbox and diff fitted :-) http://i1221.photobucket.com/albums/...0128-00216.jpg Where's the Wally LOL????????????????? http://i1221.photobucket.com/albums/...0128-00218.jpg Braided turbo line http://i1221.photobucket.com/albums/...0217-00254.jpg Vf28 beside a TD05 18g http://i1221.photobucket.com/albums/...0131-00223.jpg.. Could not really take much photos when all was in as it was raining.. :( Rear anti roll bar is in.. I also have some new gauges waiting to replace my old cheap gauges.. Prosport Stepper gauges... :D http://i1221.photobucket.com/albums/...0207-00235.jpg Centre pod holder flocked.. http://i1221.photobucket.com/albums/...0219-00256.jpg White pipes fitted... :-) http://i1221.photobucket.com/albums/...0312-00277.jpg Fitted 550cc injectors today, put rear seats back in as wanted to make sure the walbro primed before it did so.. Fitted the rear drive shafts now, the driver side one clicks into place without a circlip.... Feels the same as the left side as it clicks into place.. So fingers crossed on that.. Also fitted a Sti steering wheel and fitted the exhaust... So coming along.. Also ordered a brand new radiator and the water feed pipes for the Turbo thanks to CJ on south east scoobies.... Even had a little time to add a little fine detail to the wheels, i know nobody like the blue lip on the wheel but i wanted to be a little different.. :D http://i1221.photobucket.com/albums/...0317-00294.jpg Brand new Radiator turned up today which i paid £43.50 for delievered!!! :D And also my £170 order from Opie oils!!! :( http://i1221.photobucket.com/albums/...0321-00298.jpg Prosport gauges fitted and home made flocked bits also fitted.. Little video below.. :-) http://i1221.photobucket.com/albums/...0331-00009.jpg |
Little update, have not been able to do much to the car as promotion at work.. I am now a European Data centre engine for Ricoh... Dont ask how i managed that as i have no clue!! All previous updates where all old stuff that was not added..
Well i have now fitted the second hand P1 splitter i have had in my garden for about a good 6 months, it needs some repaired, that will be done when i get the spoiler front bumper and skirts sprayed.. But that will be a while yet as want the mapping done and the AL turned on the Simtec.. :-) Have spoken to Dan and Simon and will be dropping the car off next week to Dans where some finishing touches need doing then hopefully can get Simon to pick the car up from there and sort the mapping... :-) I am getting very excited!!! Maybe a little to excited... http://i1221.photobucket.com/albums/...ps8148ce70.jpg http://i1221.photobucket.com/albums/...psf7b644bb.jpg |
nice looking classic there mate!
where did you get the drivers site fog light cover with the intake hole in it? |
Cheers bud. It's a p1 fog light surrounding. Normally there is supposed to be a p1 fog light there..
|
nice 1, some very good work mate
|
Cheers mate.
|
First time i have ever taken my car to a garage for work to be done as i just dont have the time anymore due to work... Was actually a tearful moment but its in hands i trust, and no major work being done.. Few pictures...
http://i1221.photobucket.com/albums/...psb83dc302.jpg http://i1221.photobucket.com/albums/...ps79e09f87.jpg http://i1221.photobucket.com/albums/...ps286e6cb1.jpg Should be done within a day or 2 then just need to see if i can get Simon to pick up and map for me.. :) Ow and turn the Anti lag on of course.. :) |
All times are GMT +1. The time now is 04:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.