Rear light gaskets
Anybody know where i can get a pair of these? Looking on the internet and can only find some in america, is it gonna be a subaru only item?
Sent from my SM-G955F using Tapatalk |
Try ICP or I imagine be subaru
|
Yeh my 1st thought was icp but couldnt find them on the web page or ebay store, might give them a call after the break
Sent from my SM-G955F using Tapatalk |
If not will probably be main dealer part but should still be available you may have to wait for them
But icp can get most parts |
If you are talking about the foam gasket they are easy enough to make from a blank sheet of foam - thats how I made mine for the bugeye
|
yeh thats the 1 mate, i have water getting in in my bugeye somewhere and i have changed the boot seal but no change, strut towers seem ok, but last winter i did notice 1 of the tail lights came with a pond so gonna do the light gaskets and see if that gets it,
SpecB, how thick foam did you use on yours? |
Not sure what the gap is between the back of the light and the rear panel but have you tried something like this:
https://rover.ebay.com/rover/0/0/0?m...2F282259968136 When I put a new rear light in my old Nissan it came with a roll of this in the box, it's a bead of bitumen sealant you put round the light cluster where it meets the metal bodywork and seals everything up watertight. |
Quote:
|
All times are GMT +1. The time now is 08:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.