|
Looking at the state of the hoses I think you were lucky to make the power you did. Also lucky not to get a problem on the Germany run. Looking a lot better after the 1st clean. I won't be able to call you Rusty anymore after its finished. Glwtp :ok:
|
Hi Nige
It certainly explains the poor running and poor throttle response . The jubilee clip was just about holding it onto the Turbo . Very lucky to do the Germany trip mate . Nige once the jungle drums start to beat You will have far better pis s taking ammunition mate . |
You will notice such a difference when the car is back together matey.
A while off yet but the time will soon go and you will have a very sort after car. All the best dude :worthy: |
A long road ahead of you but well worth it when it's done good luck mate
|
1 Attachment(s)
wots the alloy block in this pic crowman
|
Quote:
Ive pulled it all out as was not noicely installed. Will re install when putting back together |
Quote:
If you want to keep the HIDs, get a new kit as they're only about 70 quid and the new ballasts are less than 1cm thick and have a much smaller footprint than the old ones you currently have. |
Quote:
The kit is a ball ache and the extra wiring is never easy to get really neat . Its all plug and play. |
Don't get me started on those light!
Jeeeeeeesus they are bright. :grin: |
Quote:
|
My turbo intake on the classic went the same way, hence the samco style replacement.
Are you going to cut off a limb and buy an OE one, or just get a subtle black samco version ? |
Quote:
Im buying a new TMIC, which will cost a fortune, as cant find a mint Ver5/6 anywhere., been looking for months now. Will either go parellel fuel rail, or reversed flow. along with inlet spacerkit. New cam belt kit. Tidy up alternator, air con etc Oh and will check the plugs are a nice fit |
Quote:
I gave my mint V5/V6 intercooler to Rob, so give hime a shout. It will be black not silver but nothing a can of alluminium paint can't sort. |
If you need me plug socket again let us know ;)
|
Quote:
|
Good luck with the build Martyn - look forward to seeing the progress updates. The finished article with be a unique piece of Subaru history :-)
|
Made good progress .
Front panel all rust ground out to fresh metal, rust treated and 4 coats of zinc primer. Next will be white primer and then top coat. Following that will be same treatment for battery tray . Not a huge amount to do before it goes to paint shop . http://i376.photobucket.com/albums/o...s/76b4b00f.jpg http://i376.photobucket.com/albums/o...s/32ce4ca3.jpg http://i376.photobucket.com/albums/o...s/b3a37cb8.jpg http://i376.photobucket.com/albums/o...s/a8642fbb.jpg http://i376.photobucket.com/albums/o...s/6aeee31a.jpg |
looks a lot better already Martyn, but it does look like you got to it all when you have...good luck matey
|
Good work, looks like a lot of graft has gone into a short amount of time!
|
Looking good mate
|
Looks good mate, good read so far looking forward to more updates, looks like you cought some of the rusty parts just in time ;-)
|
Quote:
It's a little daunting , but no rush as funding needs to be well spread put |
A little more work on the P1
Picked up a boost solenoid bracket, front bumper support and boot lid off a Ver 6 Sti from jap performance. Reason for replacing these is the dreaded rust. Ground out all the rust from Inner wing , primed and top coat then 1200 paper the edges to blend to old pain work . needs one more coat as still a tiny bit patchy . Finish is brighter as fresh paint but wont show to much as the area is 85% covered by brackets , air box etc. Next is make good battery tray then just a cut and polish of remaining areas of engine bay. Then a last I can strip the res off the car and send if to coach works http://i376.photobucket.com/albums/o...s/c3a4dd59.jpg http://i376.photobucket.com/albums/o...s/c4322a00.jpg http://i376.photobucket.com/albums/o...s/93364346.jpg Decided to go for anothe boot as the one on the P1 has quite extensive rust around the various bolt holes and rubbe stoppers This one has normal scratches but is mint and rust free http://i376.photobucket.com/albums/o...s/0ab94340.jpg My mate Rich came around and drilled out and tapped about half a dozen snapped bolts . He is a dab hand at that sort of thing. http://i376.photobucket.com/albums/o...s/52ad66e3.jpg |
Looks like its coming along nicely :ok:
|
Look at you with your posh prototype type thing....... If you keep replacing parts it'll be a different car!!
Keep up the good work mate.... And yes, I'm proper hammered:) |
A few magnets then pal . Good man
|
Just Agnew !!!
Took me 4 times to sign in! I'm going bed now......... Pip pip and all that |
When we spoke whilst over giving you a good drilling you wasnt going to paint that area, but i bet your glad you did, It looks a million times better. :10:
Hmmmm im thinking the whole engine bay should be done now. :getmecoat: http://i376.photobucket.com/albums/o...s/c4322a00.jpg |
It does show though Rich .
It would be nice to do it all , but I'm just going to do the rusty stuff , which is mainly covered up by stuff . |
who have you chosen to do the painting and when?
|
Tim, it's going to treslers on belbrook , have a good arangement and I can be actively involved in the project , told them I will be down every day taking pics . 2 weeks and hopefully it will be down their .
|
Very nice mate :-)
|
Another few bits done on the P1.
Inner wing flat back with 1200 then some fine cutting compound and a polish, pleased with match to rest of engine bay . Top coat applied to boost solenoid bracket then fitted back to strut turret http://i376.photobucket.com/albums/o...s/ffb2ef21.jpg Slowly cleaning harness and refit boost solenoid etc. Marking up position for Alarm bracket http://i376.photobucket.com/albums/o...s/5c22db60.jpg http://i376.photobucket.com/albums/o...s/1e82cd08.jpg Time to attack the battery tray and surrounding area, looked like battery acid had been spilt down inside of wing at some point also. http://i376.photobucket.com/albums/o...s/29c21a25.jpg Took some work this side , wanted to be sure I had ground out as much rust as possible. A few coats of primer, pleased wih result. http://i376.photobucket.com/albums/o...s/4e08f331.jpg 1st coat of top coat, looks quite grey, takes 3 coats to settle the right colour. Will leave for 24 hours and then flat back and apply another two coats . http://i376.photobucket.com/albums/o...s/b5e169b0.jpg Onto the bumper support bar, it was in excellent condition as off a Ver6 freshly imported. A rub down and general key of paintwork http://i376.photobucket.com/albums/o...s/24312a45.jpg Hanging in my cluttered garage after 2 coats of primer http://i376.photobucket.com/albums/o...s/50732de2.jpg http://i376.photobucket.com/albums/o...s/bcaea563.jpg |
Comming on very nicely fella, that engine bays gonna look spotless :-)
|
Cheers Andy
Won't be mint , but should look clean and tidy Need to get the car stripped down ,as due to be collected by body shop |
Another little update after half a day on it.
Bumper bar finished Mint TMIC as supplied FOC by SES members. Beer tokens will be supplied at next opera unity . Interior stripped, spoiler off, just side skirts and rear bumper and off to the coach works :-) http://i376.photobucket.com/albums/o...s/a16afcbb.jpg http://i376.photobucket.com/albums/o...s/90c7507d.jpg http://i376.photobucket.com/albums/o...s/b085bd03.jpg http://i376.photobucket.com/albums/o...s/b6013a89.jpg http://i376.photobucket.com/albums/o...s/918f0ed7.jpg http://i376.photobucket.com/albums/o...s/3fc1d963.jpg http://i376.photobucket.com/albums/o...s/a130da2a.jpg http://i376.photobucket.com/albums/o...s/c32255df.jpg http://i376.photobucket.com/albums/o...s/7d068ab9.jpg |
Great job martyn! Are they spraying the interior as well?
|
Quote:
Not spraying inside , but I wanted seats and carpet out as they are going to be professionally cleaned , also there are a number of clips , trim etc that I'm renewing . It's best time to do it . Going to be very careful when putting car back together :-) |
Looking good :doubleup:
|
looking good crowman,all the floor/inside looks good nic. so was the only rotten bits in the front.
|
Looking good Martyn, and pleased my old TMIC is going to a good use.
It's been sat in a box in the garage for about 6 years. To think it nearly got chucked a few months back. |
Quote:
|
Quote:
The TMIC is as good as they get , and it's exactly same as Sti5/6 , same size etc .once silver and the factory sticker is on it , will be perfect . A meal is on me for you and Rob . |
Quote:
|
Quote:
|
Quote:
That will three happy meals then. :nod::lol: |
Coming on nicely mate, I do love the spoiler less look, I know you gonna put the p1 spoiler back on though :-)
|
did you pick a colour for the ic yet???
im looking at doing mine |
Quote:
|
| All times are GMT +1. The time now is 03:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.