South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Mechanics (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=41)
-   -   JDM Big port heads (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=9004)

Tomma 26-07-2012 05:44 PM

JDM Big port heads
 
Does anybody know what JDM Models had the avcs big port heads?

Not sure where to post this!

C. J. 26-07-2012 06:57 PM

version 8

Tomma 26-07-2012 06:58 PM

Quote:

Originally Posted by C. J. (Post 93799)
version 8

Thanks CJ, I shall start looking!

C. J. 26-07-2012 07:58 PM

It's only some not all the are big port

Tomma 26-07-2012 08:17 PM

Oh right ok, I've had a look on nasioc and there are a few threads about which ones are and aren't big port.... just trying to piece it all together!

SpecB 26-07-2012 09:42 PM

Interestingly there is a lot of debate about if the big port are worth it....

It appears to be the difference of low from inlet to exhaust that are critical, look at this for some interesting reading
http://www.cncheads.co.uk/?p=786

Tomma 26-07-2012 10:13 PM

Cheers, interesting and the gains look pretty impressive..... I had looked at these before but the cost put me off a bit to start with especially if you don't have good condition heads to exchange!

Tomma 07-08-2012 01:04 PM

Does anyone know what or if there are any specific codes for Big Port Heads? I've had a look around and it appears that heads starting with RHT and LHT (maybe V8) are definitely big port heads but I've also seen on a few other places that heads starting with RHS20V and LHS20V are also big port but opinions differ!

I had heads starting with RHH on my bug which I think are 2.5 heads but the replacement ones I got have rhs20v and lhs20v on them..... there is a massive difference in the intake ports.....

old heads
http://i1205.photobucket.com/albums/...6/25999f1e.jpg

replacement heads
http://i1205.photobucket.com/albums/...6/c54ca2de.jpg

Any ideas!?!

Tomma 07-08-2012 04:51 PM

http://bbs.22b.com/forums/showthread...ght=port+heads

Makes me think they are big port??

Tomma 08-08-2012 10:21 PM

After looking through lots of threads on various forums I've come to the conclusion and identified these heads with the casting Id numbers as definitely being Big Port Heads!

Couldn't of found that out on Facebook! ;-)

Anger 08-08-2012 10:37 PM

Quote:

Originally Posted by Tomma (Post 94584)
After looking through lots of threads on various forums I've come to the conclusion and identified these heads with the casting Id numbers as definitely being Big Port Heads!

Couldn't of found that out on Facebook! ;-)

Being that Andy F, RCM, Engine tuners Martyn and Steve Darley are on there to name a few.... Err yes you could ;)

ralliart didz 08-08-2012 10:47 PM

[QUOTE

Couldn't of found that out on Facebook! ;-)[/QUOTE]:rofl::10:

Tomma 08-08-2012 10:47 PM

Ha ha! Ok maybe I could but I'd have to get them to be my friend first!?

Anger 08-08-2012 10:52 PM

You hardly got an answer on here either :D

Tomma 08-08-2012 10:53 PM

Quote:

Originally Posted by Anger (Post 94590)
You hardly got an answer on here either :D

That is a very good point!

Oh well I've had a result so can't grumble!

Anger 08-08-2012 10:55 PM

A great result mate :)

ralliart didz 08-08-2012 11:07 PM

Quote:

Originally Posted by Anger (Post 94590)
You hardly got an answer on here either :D

no because every1 was on facebook :grin:

Tomma 10-08-2012 03:00 PM

Quote:

Originally Posted by Anger (Post 94593)
A great result mate :)

As luck goes I'd already found a set of Big Port Heads prior to finding this out so these are still for sale!!

Quite a difference in the ports......

Small port
http://i1205.photobucket.com/albums/...6/64b87e27.jpg

BIG port
http://i1205.photobucket.com/albums/...6/0165c018.jpg


All times are GMT +1. The time now is 09:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.