3 Port solenoid
 

Going for a remap next week and got a 3 port solenoid to go on, and wondered how to fit it. Or if someone can help me. Cheers

Re: 3 Port solenoid
 

Remove the existing t-pieced hose between the turbo and actuator (with it's internal restrictor).
Retain the long section of hose that comes from base of t-piece as this can be re-used.

connect 3-port as below

Top port to turbo
middle port to actuator
bottom port vent back into inlet manifold via the 90 degree connection to right of header tank.