Downpipe O2 sensor anti seize compound
Assume there will be a lot of heat travelling through the downpipe.
Is copper grease/copper slip a suitable anti seize compound when porting the O2 sensor over? Or something more specific needed for high temperatures? Thank you! |
Following post as I'm about to change a knackered 02 sensor myself
|
Swapped mine from a standard downpipe to a stainless decat and didn't use anything, obviously not tried removing it 8 years after fitting.
|
All times are GMT +1. The time now is 09:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.