Snow foam lances?
 

Hi all,

Is there anywhere local ish to me that you can get these from? Was going to order one online but I'm a little impatient and would like it for the weekend.

Cheers
Chris

I got mine from Clean Your Car as you have to get the correct connection for your pressure washer, it was about £50 or Halfords do the cheap plastic Karcher one for about £18, which works well, I have one you can have for £10 that has been used once as I have now bought the Autobrite one

http://www.halfords.com/webapp/wcs/s...egoryId_165569

Paul

halfords also do an adaptor to connect the kartcher foam gun to a hose pipe for about a tenner, and have been told that this combination gives a ggod a result as a gilmore foam master 2....

http://www.halfords.com/webapp/wcs/s...egoryId_165569


http://www.halfords.com/webapp/wcs/s...k&iozone=PDPz1

£28.00 instead of £49.00..... bargain

sorry paul, should have read this...so combine the 2, £20...lol

oh, paul, if chris doesnt want it, i will take it from you for £10...

No probs, let me know.

I'm really after one of the ones with the adjustable part on it, like the hd one

This is the one I have now:-

http://www.cleanyourcar.co.uk/washin.../prod_371.html

i dont gave the luxury of owning a PW, so have no choice but to use the hose fitment type..


Paul i will have the halfords one from you, just need to get to Crawley to pick it up...

I have the one from polished bliss which when used with Meguires hyper wash gives great results.

Got the Karcher one and use Meguiar's Ultimate Wash n Wax [need to water it down slightly]. Works a treat for a quick washngo.

The Karcher one is fine, the new Karcher one is better:ok:

Always best to experiment with the amount of snowfoam used, depending on the size of your bottle try about an inch of snow foam and top the rest up with 'warm' water, see how it goes and try a little more or a little less to get whats right for you. (different snowfoams will give different results so using the same ratios for different products doesn't always work)

Also, try adding something like Megs Hyperwash to the snow foam and top up with warm water. Super foamy and extra cleaning all in one:ok:

If your going to be reapplying wax and want to strip back you can also add in some APC to the mix and remove the protection ready for the new layer/s..

before you use whatever mix you use, make sure and give it a bit of a shake...

Also well worth running some APC through the lance to clean it and rinse it out before you put it away:ok: to keep it nice and clean ready for next use...