South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Mechanics (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=41)
-   -   Worrying resonating sound (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=1158)

Scruff 22-03-2009 06:14 PM

Worrying resonating sound
 
Between about 2800 and 3000rpm's i get a rather worrying sound. Its a bit of a metallic resonating clatter. It seems to disappear after about 3100rpm but then that could just be due to the noise produced by the rest of the car. I've got a horrible feeling its coming from the turbo. It'll do it at standstill and moving. Thoughts anyone?

Also i want to get the car serviced soon and i suppose i might as well have them do my brakes at the same time. Anyone know someone good (and cheapish) who can do this in or around Crawley? What sort of price for a service without cambelt?

majorscooby 22-03-2009 06:35 PM

Re: Worrying resonating sound
 
could it be something like the cat converter rattling, if you have one??
exhaust baffels or a heat shield rattling maybe????
hope you find it these things are so annoying!!!!!!!!!!! :doubledown:

C. J. 22-03-2009 06:48 PM

Re: Worrying resonating sound
 
heat sheilds more than likely
Try Mick rivett his not to far http://www.rivettautos.co.uk/

Crowman 23-03-2009 12:44 PM

Re: Worrying resonating sound
 
Lay money on it beingheat sheilds, just cut them off :doubleup:

WRX_Paul 23-03-2009 01:51 PM

Re: Worrying resonating sound
 
I had that on mine last year, it was the heat shield, just waited for it to cool down and 'pushed' it back out of the way :doubleup:

Scruff 24-03-2009 05:35 PM

Re: Worrying resonating sound
 
You were all right, it was a heat shield somewhere under the turbo, fixed it with a hammer and a pair of pliers :)
Cheers all!

darryl.k 10-05-2009 08:14 PM

Re: Worrying resonating sound
 
Hmm... This sounds familar.

I get a metallic / resonating sound from O/S engine bay at 3900 revs when decelerating. Only I've taken the heat sheild off, checked sheilds, tightened bolts, chopped bits off, shouted at it... But I still get this noise. Is there such thing as turbo chatter, where the turbo is worn or bearings on the way out? What effects / wear can occur to the turbo to cause such a noise?

Also is a TD05 a straight swop for a TD04?

Cheers guys

Scott.T 10-05-2009 09:25 PM

Re: Worrying resonating sound
 
Quote:

Originally Posted by darryl.k
Hmm... This sounds familar.
Also is a TD05 a straight swop for a TD04?

Cheers guys

On a WRX 1993-1996 Wagon yes, a straight swap if from the same years (1993-1996).
All other Pre96 have TD05 as standard.

For 1997> you need to convert the TD05 to front entry, still a straight swap on the exhaust side fittings, just the air intake needs a new cover plate to convert to front entry (about £50-£70).

iain1502 11-05-2009 08:58 PM

Re: What wheels
 
Hello.

So I have purchased some new wheels and they will soon be delivered and quickly put on.
I will then be selling my old wheels, however before doing this I am after a little more informaion on what I will be selling.
Can anyone help.
The only markings on the wheel are.

JWL - Japan Light Alloy Wheel
VLA - Vehicle Inspection Association
620 kg
In the center there is an bird (eagle possilbly)

Can anyone tell me the make, what I should expect to get from them - they have plenty of rubber on them!!!

Thank you

Iain


All times are GMT +1. The time now is 01:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.