dump valve for classic
 

hi guys,was thinking of fitting a dump valve to my classic, what are the pro,s and con,s of one? and what valves are best,i was looking at forge dump valves.or is best left standard! please help cheers wayne

dump to atmosphere means you are dumping air thats already gone past the MAF and the fuel being sent to your engine will be momentarily rich when your DV blows.
Recirc DV obviously gets rid of this.
You can get dual DV's that are semi recirculating (Turbosmart I think do one) which lessens the problem a bit as you can set some to recirc and some to vent to atmosphere.

Before you fork out on a DV though, you could try my setup.
Leave the standard DV in place and simply remove the intake snorkel in the drivers side wing. This allows you to hear the standard recirculating DV. not very loud, but its a unique sound that you wont hear that much on scoobs.
you do hear turbo spool louder too which I think sounds cool.

also for the record, i;m running a very loud exhaust so the dump with the snorkel removed is loud enough to be heard, although I only realy hear it loudly when I give it some beans

manythanks andy for reply,i will try what you said.thanks

d.v
 

hi m8,this snorkel in the wing,can you see it from engine bay or do need to remove wheel arch cover to see it,can only see air box intake,cheers wayne

its in the wing.
if you open the air box n remove the panel filter, you will see there is a hole in the air box which goes through in to the wing. thats the start of the snorkel.
if you remove your wheel and then your plastic wheel arch liner, you will see the snorkel.

thanks andy

how did you get on ?

hi m8,not done it yet,job for the weekend i think! will let know when done or have a prob. lol cheers wayne

Dont bother, original is best.

dv
 

thanks m8,come round to thinking that way myself now.cheers for reply wayne.

Wayne, before you remove your intake snorkel, I did a vid so you can hear what it sounds like. sounds a bit louder than on the vid, but you get the idea:-
http://www.southeastscoobies.co.uk/v...836#post108836

any ideas on how to do this(photos or walkthrough) .I had a go a few months ago ,got the plastic liner off but couldnt remove the big black plastic thing.

I threw the snorkel so cant do photo's but you probably couldnt pull it out as you need to remove the air filter box under the bonnet first to get to the bolt behind it which holds the intake snorkel in place.

searched the net n found this which may help :-
http://mrtperformance.com.au/forums/...ead.php?t=2400

snorkel
 

hi andy,took it out today,not to much trouble at all,i do have a dv sound now,which sounds much better,do i need to block of any holes in inner wing,or is it fine.cheers for help.wayne

nah, holes are fine left as they are.

cool :thanx:

I have Standard DV and k&n on my 94 classic sounds like darth vador ,:-)