South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Car / Scooby Chat (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=17)
-   -   number plates (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=13063)

tangowayne 15-02-2012 06:44 PM

number plates
 
mot test time today for my car,but failed on number plates! they said background overprinted or shadowed with text,they do have pro drive in the reflective part, but i was told they were ok when i brought them,other then that there normal.any body have any plates like these and passed? thought he was taking the p.ss when he said it.lol bloody just mot':rant:s

riiidaa 15-02-2012 06:48 PM

buy some cheap standard ones off eBay for MOT that conform

riiidaa 15-02-2012 06:49 PM

eg http://www.ebay.co.uk/itm/Car-Number...item3f13b3e5fa

munk 15-02-2012 06:54 PM

shouldnt have anyhthing behind letters or numbers on plate as far as im aware mate

When replacing your number plate you should make sure that the correct material has been used to manufacture the plate. It should be made from a reflective material. Front number plates must display black characters on a white background and rear number plate must display black characters on a yellow background.
The Driver and Vehicle Licensing Agency is not aware of any self-adhesive number plates that meet the British Standard requirements.
Characters on a number plate can be 3D, providing they meet all the other requirements, but honeycomb or other background patterns are not allowed.
Also, the characters on a number plate need to be a standard height and width.
Your number plate should show the correct:
  • character height - 79 millimetres
  • character width - 50 millimetres (except the figure 1 or letter I)
  • character stroke - 14 millimetres
  • space between characters - 11 millimetres
  • space between groups - 33 millimetres
  • top, bottom and side margins - minimum 11 millimetres
  • space between vertical lines - 19 millimetres

DukeBoy 15-02-2012 06:55 PM

http://www.motuk.co.uk/manual_630.htm

Reason for rejection 1e

munk 15-02-2012 06:57 PM

also must have bsau 145d...?on them bottom right of plate..to show they comply with regs:tumbleweed:

if memoryservs me right..

bigemp 15-02-2012 07:18 PM

Quote:

Originally Posted by Tangowayne (Post 122331)
mot test time today for my car,but failed on number plates! they said background overprinted or shadowed with text,they do have pro drive in the reflective part, but i was told they were ok when i brought them,other then that there normal.any body have any plates like these and passed? thought he was taking the p.ss when he said it.lol bloody just mot':rant:s

you bloody criminial you should be locked up and throw away the key:doubleup:

AndyWRX 15-02-2012 07:35 PM

You need a friendly mot tester fella ;-) if not just get a set of cheap legal plates

tangowayne 15-02-2012 07:40 PM

cheers guys,will buy some plates that they like,and keep them for mot day! thanks all and big emp! bloody criminial.lol

C. J. 15-02-2012 08:26 PM

Quote:

Originally Posted by AndyWRX (Post 122345)
You need a friendly mot tester fella ;-) if not just get a set of cheap legal plates

One of those as already posted a link ! :)

tangowayne 15-02-2012 09:02 PM

thanks,plates on there way 2 moz,then back for mot friday:thanx:

riiidaa 15-02-2012 09:46 PM

Thinking about it mate, I have gone about replying to this the thread the wrong way, I should have said, "As it's an MOT failure, how about you sell me the car now"
:)

tangowayne 16-02-2012 06:45 PM

ha,ha, good try bud lol


All times are GMT +1. The time now is 09:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.