Crank Pulley Removal Tip
 

After spending far too long with 1 meter long breaker bar and 22mm socket, I gave up on trying to remove my Crank Pulley.

But then I found this tip on YouTube, and I had the pulley off in less then 5 minutes with a breaker bar half the length :

http://www.youtube.com/watch?v=JnkcnqF_S3c

Impact gun does the trick

You would never get a gun in there unless it's some fancy 90 degree thing.
It's tight enough with just a 22mm socket and T-bar.

Cool.