![]() |
Air/fuel gauge
Hey guys little question i fitted a air/fuel radio gauge to my car iv been messing about with it for afew days now but cant seem to get the bloody thing to work right just wanted to know if any1s got one im trying to work out what o2 sensor to hook it upto is it the sensor at the front of the exhaust near the engine or the one closer to the rear and what wire i need to connect it to iv tryed nearly all the wires on the front o2 sensor but cant get it to do anythink it just sits right over on rich and dont move any1 got any suggestion please let me know thanks guys
|
The newage uses a sudo wide band sensor in the front position.
I wouldn't advise connection to that. I have only connected these type of sensors to classics which use a regular sensor. If the rear sensor is only a 3 or 4 wire sensor then it is probably similar. If you can disconnect the plug, the sense wire normally has a gold contact and the rest are silver and are just sensor heater supply, heater return and earth. |
Ok mate thanks il give that ago in the next couple of days and let you know thanks again.
|
All times are GMT +1. The time now is 03:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.