Catch can setup
Hello guys just done catch can setup on my bug I've ran passenger head breather to crank breather then that to catch can and drivers head breather to catch can. Then catch can to atmosphere
Is this correct |
some pics may help if you can :ok:
|
No in a word!
Keep the crank breather separate if you only have two ports on catch can and join the two heads together then take them to the catch can but increase the pipe id from the t to the catch can |
Also have you blanked the PCV valve or left it in place as if you don't blank it you can pull air back through the catch can and associated pipe work straight into the inlet which defeats the point really!
|
Cheers guys for the advice I've now put both engine breathers to catch can then crank breather to catch can then catch can to atmosphere
|
All times are GMT +1. The time now is 02:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.