The FOZ
 

Thought i would start a small project on this as not going mental with it so first thing ive done has bought the mcguires headlight resto kit and do the headlights as they were cloudy anyway some pics of proof .
First pics is before then followed by after look so much better .
https://uploads.tapatalk-cdn.com/201...6dc58bd309.jpghttps://uploads.tapatalk-cdn.com/201...ec6db5f878.jpghttps://uploads.tapatalk-cdn.com/201...c7bccaf017.jpghttps://uploads.tapatalk-cdn.com/201...fbefc77eec.jpg

Sent from my SM-G920F using Tapatalk

Nice work scotty :ok:

Real bug bear of mine cloudy headlights

Very nice. Did you have to clean from inside as well or just outside? I was thinking to do the same work my Fozzy.

Wouldn't advise cleaning the inside, they have a protective coating on the inside that's easily damaged.

Beat me to it Dave .

its the heat off the lamps causes the dirt to "burn" into the plastic lens causing the dull / dirty look.........

best way is to have them machine polished as it restores to a nearer new condition than any other treatment we have come across and lasts well

Started to add some paperwork so done a check on it from the land of Jap and also of course added the importers folder .
https://uploads.tapatalk-cdn.com/201...26acf7eaae.jpghttps://uploads.tapatalk-cdn.com/201...0079a9b005.jpghttps://uploads.tapatalk-cdn.com/201...a220bafa5d.jpg

Sent from my SM-G920F using Tapatalk

Today the Foz had new rubber with right sizes fitted so much better and also replaced some old grill clips for new ones now its wabble free i am really struggling to find things to do to it this is a first from me lol .

Few things to think about if not already done:-

- Rear strut brace (Whiteline QR bolts allows the load space to still be used when needed)
- Thicker rear ARB (20 or 22mm seem popular choices)
- Rear subframe locking bolts

Makes a huge difference compared to standard in my experience and none of it costs the earth.

Its already fitted with a cusco rear strut brace :-D will look into the others but i would need a damn good excuse as its mint underneath and nothing needs replaced yet :?

Does it ride any better on correct tyre sizes?
V.cool cars these.

Ride hasnt change at all tbh only thing is when its mega windy you can hear it at the front especially in the arches lol.

Was up at my guru's garage so put the Foz on the ramps it needs a little clean but its fitted with cucso front and rear braces as you can see but main reason was to measure the exhaust and low and behold it measures the exact same as a classic and is also 3 sections like a classic so thats good news and can look for a replacement centre section .
https://uploads.tapatalk-cdn.com/201...8fd9132d4e.jpghttps://uploads.tapatalk-cdn.com/201...0dd576bf5e.jpghttps://uploads.tapatalk-cdn.com/201...8e6b7925a6.jpg

Sent from my SM-G920F using Tapatalk

I tried telling you that twice about the exhaust. ;)

Good news on the braces. :ok:

I know just wanted to be 100% :-D

On another note the sti badge on the grill is it cherry red or pink .

Mine's pink.

Cheers .

First part ive bought for the Foz any guesses 😂😂
https://uploads.tapatalk-cdn.com/201...cbbbb37bd5.jpg

Sent from my SM-G920F using Tapatalk

Glasses?:tumbleweed:

Tbf i had that coming to me :lol:

Seems taptalk is playing up so trying it this way with pics so got these today hopefully will get them fitted when i have time :lol:

https://uploads.tapatalk-cdn.com/201...ddb01c9f30.jpg

Nice :ok:

Well removed the passenger light got replacement ready to fit and noticed a major stumbling block bloody headlight connectors are totaly different so wont be fitting them bummer might just strip mine and paint them instead .

Well got board tonight so made use of the quiet time and stripped the lights ready for the transplant onto mine 😁😁
https://uploads.tapatalk-cdn.com/201...ca73917878.jpghttps://uploads.tapatalk-cdn.com/201...880103818c.jpghttps://uploads.tapatalk-cdn.com/201...6b3a0acb82.jpg

Sent from my SM-G920F using Tapatalk

Food for thought went to see we restore alloys and they showed me a swatch of rays bronze not sure if it be to light or right against the blue .

Refurbed yours I gather with rays/Volks bronze ?

Yes .

I think will look smart , seen a few blue r34 gtr wearing ce28n's and there blue isn't far of yours so I imagine will suit, nice dark shade of bronze .
Funny as been looking at the rota fighters in bronze for myself

Here we go lets see what bhp the FOZ is producing 😀😀
https://uploads.tapatalk-cdn.com/201...bb5f3a8101.jpg

Sent from my SM-G920F using Tapatalk

Exciting!

being mapped or just a power run?

Already mapped on uk fuel but just wanted to know what she is running and see if any issues which going by the graphs

283bhp and 325torq

Also see she is running rich so looks like a new maf is on the cards .

Also the boost tales off so thats interesting aswell so will get a smoke test done to see if any leaks .

https://uploads.tapatalk-cdn.com/201...1afc74c738.jpghttps://uploads.tapatalk-cdn.com/201...08adebdbba.jpg

Sent from my SM-G920F using Tapatalk

Nice result mate and glad it’s given you information to work on..

it could be mapped to to tail the boost off,
looks like the ecu could be pulling the timing back as couple of dips in the curve,

Its possible that dyno and roads figures are different has here is the road figures of

310bhp and 362torque
https://uploads.tapatalk-cdn.com/201...52a24c63f4.jpg

Sent from my SM-G920F using Tapatalk

Starting a pile of parts for the Foz not much but its a start lol
https://uploads.tapatalk-cdn.com/201...e989ab5a0e.jpg

Sent from my SM-G920F using Tapatalk

Not always about what you start with, it’s where you are going. What’s your future plans, exhaust system related I guess?

Yes looking at either 2.5 or 3" Haywood and scott cat back system just cant decide .:brickwall:

This should enhance the front end of the Foz 😀😀😀😀
https://uploads.tapatalk-cdn.com/201...1fa1e894f7.jpghttps://uploads.tapatalk-cdn.com/201...df4ebec447.jpg

Sent from my SM-G920F using Tapatalk

I do like these and tried to convince Liz that she should buy one that popped up on PH the other day. Her response was " but it's a manual " :angst:

Next time we see each other your more than welcome for a test drive .

Sent from my SM-G920F using Tapatalk

Mocking up the lower lip ready for some surgery 😀😀😀
https://uploads.tapatalk-cdn.com/201...ad6a39d87f.jpghttps://uploads.tapatalk-cdn.com/201...2885c44c8c.jpghttps://uploads.tapatalk-cdn.com/201...7e7fe7b484.jpg

Sent from my SM-G920F using Tapatalk

Looks good Scotty :ok:

Agreed looks spot on except I would have to do something with the ends as that don't look right IMO being to much past the bumper line if you know what I mean?

Agreed - didn’t spot that... still got rubber and brake dust smoke in my eyes from yest! Ha ha

And its all fitted just need to do the final end trims as didnt trim them short enough
😀😀😀
https://uploads.tapatalk-cdn.com/201...f8cd676eaf.jpghttps://uploads.tapatalk-cdn.com/201...7402defacd.jpghttps://uploads.tapatalk-cdn.com/201...2313678f40.jpghttps://uploads.tapatalk-cdn.com/201...1d7e72be97.jpghttps://uploads.tapatalk-cdn.com/201...797d9ff7f7.jpghttps://uploads.tapatalk-cdn.com/201...f5a30f1ec3.jpg

Sent from my SM-G920F using Tapatalk

:10: :10:

:doubleup:

Nice work :ok:

What is the lip originally made for?

A hawk sti Steve .

Let's see how long it takes to for new exhaust to be made and delivered:-D

Well the Hayward&Scott exhaust arrived today hopefully get it fitted at the weekend
https://uploads.tapatalk-cdn.com/201...cb8b9132a2.jpghttps://uploads.tapatalk-cdn.com/201...d7191ee310.jpghttps://uploads.tapatalk-cdn.com/201...03cd29ba86.jpg

Sent from my SM-G960F using Tapatalk

What's on the Foz at the moment scotty? Do we get a before/ after sound post :-D :ok:

Oem centre section and a hks back box Steve will do a vid of before and after :-D

The system is on now it's quieter until you hit the loud peddle .
https://uploads.tapatalk-cdn.com/201...3d3a8bf061.jpghttps://uploads.tapatalk-cdn.com/201...db92796c3e.jpghttps://uploads.tapatalk-cdn.com/201...80cc76af3a.jpghttps://uploads.tapatalk-cdn.com/201...99bc55afd8.jpghttps://uploads.tapatalk-cdn.com/201...e85d0811d0.jpg

Sent from my SM-G960F using Tapatalk

Looks spot on.

Looks good Scotty :ok:

How good was the build quality of the exhaust Scotty? I purchased a Hayward and Scott rear exhaust from Scoobyworld and got SMD to fit it. Brent was not impressed with it and had to make some modifications to get it to fit. After some discussion Scoobyworld made a partial refund.

Build quality is spot on and fitted straight on only thing wrong is the rear hanger they could have left it straight as can't move the back box so that the tail pipe sits n the centre

I half thought it looked slightly out of centre, but put it down to perspective.

Can get the hangers redone so not really a big issue and doesn't affect the sound :-D

A little sound clip of the new Hayward and Scott on the FOZ.

https://youtu.be/IzWcLorLuS8

Sent from my SM-G960F using Tapatalk

Nice one Scotty :ok:

Well look what's missing it was hanging on so I removed it and decided I'm not replacing it as it looks better without and I've not washed it for about 5 weeks due to the rain we have been getting lately .
https://uploads.tapatalk-cdn.com/201...f9ca1bcb13.jpghttps://uploads.tapatalk-cdn.com/201...e9a88e0bf8.jpg

Sent from my SM-G960F using Tapatalk

I like the before :-D

In for Mot today passed with ease also treated it to 10/50 engine oil and oil filter change no change with how it looks or new mods .

still miss the sound of my H&S, sounds and looks great Scotty!

Must sound similar to the Scoobyworld stuff, they’re made by Hayward and Scott I think? Either way looks amazing! :ok:

H&S supply Scoobyworld so there stuff is exactly the same.
very nice sounding system.

Finally the foz is booked in for a wheel refurb just need to decide on colour lol .

Picked the foz up today looks so much better with the wheels done just need new center caps .
https://uploads.tapatalk-cdn.com/201...cc002efb6b.jpghttps://uploads.tapatalk-cdn.com/201...dc1c588652.jpghttps://uploads.tapatalk-cdn.com/201...02da173e5e.jpghttps://uploads.tapatalk-cdn.com/201...f318e0f638.jpg

Sent from my SM-G960F using Tapatalk

Awesome :ok:

Like the colour choice Scotty :ok:

I do like the them alot, very nice. do you drive down past littlewoods fencing near battle aswell?

It wont be me as I live in Scotland :chug:

haha yeah maybe not then. i love the way you added a :chug: are you trying to say we like a drink :-D:-D:-D:chug:

Time to go and get a new belt as the power steering belt decided to let go last night in the pishing rain lol .
https://uploads.tapatalk-cdn.com/201...0f44d96883.jpg

Sent from my SM-G960F using Tapatalk

Dropped the foz off at Hypertech needs more than a power steering belt Christmas has came early for me then lol .

Did something seize and take the belt out?

No we had a look and crank pulley has failed .

The foz is home need to sort the paint work out next I think .

Today after work I've removed the rear spolier ready to go to bodyshop tomorrow to get a respray due to all the lacquer peel looks weird without the spolier .
https://uploads.tapatalk-cdn.com/202...b8929c6a41.jpghttps://uploads.tapatalk-cdn.com/202...3fd9503a78.jpghttps://uploads.tapatalk-cdn.com/202...20a55d1ca1.jpghttps://uploads.tapatalk-cdn.com/202...558beec30c.jpghttps://uploads.tapatalk-cdn.com/202...538fdc8bb0.jpg

Sent from my SM-G960F using Tapatalk

It will look really good at the Ring. :doubleup:

I know sorting things out on it the now see how funds will be in September but euro tunnel ticket is already covered from my tesco vouchers :ninja:

The Fozzys rear spoiler is looking fresh collecting it on Saturday.
https://uploads.tapatalk-cdn.com/202...1db5523e69.jpghttps://uploads.tapatalk-cdn.com/202...fba7eac7d9.jpghttps://uploads.tapatalk-cdn.com/202...4001a23eea.jpg

Sent from my SM-G960F using Tapatalk

Looking good, I really need to get the wagon sorted :sad:

Today I collected and fitted the spoiler they have done an outstanding job on painting the spoiler even done the 2 screws that are hidden under 2 caps anyway heres some pics .
https://uploads.tapatalk-cdn.com/202...3dea2af240.jpghttps://uploads.tapatalk-cdn.com/202...b155f25e84.jpghttps://uploads.tapatalk-cdn.com/202...0c2f2f9b25.jpghttps://uploads.tapatalk-cdn.com/202...eb0a88d258.jpghttps://uploads.tapatalk-cdn.com/202...1f3ed4a8e9.jpghttps://uploads.tapatalk-cdn.com/202...b3609ccf6a.jpghttps://uploads.tapatalk-cdn.com/202...3f225f4cb9.jpghttps://uploads.tapatalk-cdn.com/202...7e2794b271.jpg

Sent from my SM-G960F using Tapatalk

Had the grille resprayed about a week due to lacquer issues looks all fresh again .
https://uploads.tapatalk-cdn.com/202...ee1771ff88.jpghttps://uploads.tapatalk-cdn.com/202...b68155626b.jpghttps://uploads.tapatalk-cdn.com/202...32eed4ace8.jpg

Sent from my SM-G981B using Tapatalk

Took delivery of a parcel of some parts from Alyn today thanks again for your help Alyn .
https://uploads.tapatalk-cdn.com/202...2bd0ffb54a.jpghttps://uploads.tapatalk-cdn.com/202...02730531b6.jpghttps://uploads.tapatalk-cdn.com/202...ca9a56449d.jpg

Sent from my SM-G981B using Tapatalk

Another delivery for the foz today from Asperformance time to get the foz booked in with Duncan at Hypertech .
https://uploads.tapatalk-cdn.com/202...e8398cc2db.jpghttps://uploads.tapatalk-cdn.com/202...757fbc9d59.jpghttps://uploads.tapatalk-cdn.com/202...3075caa081.jpg

Sent from my SM-G981B using Tapatalk

All looking good,new parts are always exciting. Are you nearing the end of the project.

As its a daily no as it will always need something done to it lol

Does it ever end..👍😂😂

Sent from my SM-G950F using Tapatalk

Guess not Ian. It's the constant lure of shiny,new bits.

Nice delivery from Asperformance today thanks Alyn . The foz should stop better with this lot might get it on track .
https://uploads.tapatalk-cdn.com/202...334504d6e4.jpghttps://uploads.tapatalk-cdn.com/202...fc05f4690c.jpg

Sent from my SM-G981B using Tapatalk

They look very nice....what have you got on the rear?

2 pot brembos as standard with dba t2 discs and pfc z rated pads .

Brakes fitted just a few more bits to fit then she be back on the road .
https://uploads.tapatalk-cdn.com/202...1d6571d5b2.jpghttps://uploads.tapatalk-cdn.com/202...46cce5a3a7.jpg

Sent from my SM-G981B using Tapatalk

Some more new parts arrived today for the foz .
https://uploads.tapatalk-cdn.com/202...cbb18718b9.jpghttps://uploads.tapatalk-cdn.com/202...851a0b2de2.jpghttps://uploads.tapatalk-cdn.com/202...1d5e83b643.jpghttps://uploads.tapatalk-cdn.com/202...80e69b0acb.jpg

Sent from my SM-G981B using Tapatalk