South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Car / Scooby Chat (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=17)
-   -   Still not happy (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=291)

Nige 17-10-2008 02:42 AM
Still not happy
 
Have uprated the car's performance with re-map,up pipe,TD05/620G Still not putting the smile on my face that i expected! So now what can i do? headers ie ported will this give more? :confused:

C. J. 17-10-2008 10:01 AM
Re: Still not happy
 
Quote:
Originally Posted by Nige
Have uprated the car's performance with re-map,up pipe,TD05/620G Still not putting the smile on my face that i expected! So now what can i do? headers ie ported will this give more? :confused:
whats the power & torque,and full spec now ?
Have you a rolling road graph ?
with these help may come faster !
P.s. you have a pm ;)

Scott.T 17-10-2008 07:50 PM
Re: Still not happy
 
Junk the sports cat and go full decat.
I felt the restriction of a sports cat when I was running 300BHP, so you will defo get a benefit running the 20G.
May also need to consider a full 3" system rather then the 2.5".
The revolution 3" is supposed to be quite good and not too loud.

Then of course, speak to CJ and get him to cut your bumper about and fit a FMIC (he's done a few now).

£540 for Revo Downpipe and System (3") http://www.revolution247.com/erol.html#69461X0

£185 for TSL Decat Downpipe (fits to std 2.5inch system) : http://www.tsl-motorsport.co.uk/newsite ... &detail=38

Nige 17-10-2008 08:27 PM
Re: Still not happy
 
Quote:
Originally Posted by SilverSurfer
Junk the sports cat and go full decat.
I felt the restriction of a sports cat when I was running 300BHP, so you will defo get a benefit running the 20G.
May also need to consider a full 3" system rather then the 2.5".
The revolution 3" is supposed to be quite good and not too loud.

Then of course, speak to CJ and get him to cut your bumper about and fit a FMIC (he's done a few now).

£540 for Revo Downpipe and System (3") http://www.revolution247.com/erol.html#69461X0

£185 for TSL Decat Downpipe (fits to std 2.5inch system) : http://www.tsl-motorsport.co.uk/newsite ... &detail=38
Hello mate. My exhaust is a TSL 3ins with a group n rear box also at 3ins.Thanks for the info though :) ;)

Scott.T 17-10-2008 08:40 PM
Re: Still not happy
 
Quote:
Originally Posted by Nige
Quote:
Originally Posted by SilverSurfer
Junk the sports cat and go full decat.
I felt the restriction of a sports cat when I was running 300BHP, so you will defo get a benefit running the 20G.
May also need to consider a full 3" system rather then the 2.5".
The revolution 3" is supposed to be quite good and not too loud.

Then of course, speak to CJ and get him to cut your bumper about and fit a FMIC (he's done a few now).

£540 for Revo Downpipe and System (3") http://www.revolution247.com/erol.html#69461X0

£185 for TSL Decat Downpipe (fits to std 2.5inch system) : http://www.tsl-motorsport.co.uk/newsite ... &detail=38
Hello mate. My exhaust is a TSL 3ins with a group n rear box also at 3ins.Thanks for the info though :) ;)
I don't think you have as most UK supplied systems are 2.5" in order to swap and change between OE and to get the cat back in/out.

The system will be 2.5" with a 4" tailpipe
The downpipe is 3" on the down sweep but it narrows to 2.5" at the flange in the last 6 inches or so where it meets the centre section.

I think your 333 upgrade pre-dates the pulse extraction system they now supply.
Even now this is an option :

-Thudercat downpipe, decat centre section, Group N backbox
or
-Pulse extraction exhaust system (+£352)

You should be able to tell bu how straight the centre section is.

3" Pulse Extraction :
[img]http://www.tsl-motorsport.co.uk/newsite/productimages/32/32.jpg[/img]

TSL Grp N
[img]http://www.tsl-motorsport.co.uk/newsite/productimages/35/35.jpg[/img]

[img]http://www.tsl-motorsport.co.uk/newsite/productimages/36/36.jpg[/img]

Nige 17-10-2008 09:19 PM
Re: Still not happy
 
Ok mate will check. :nod:

Scott.T 17-10-2008 09:29 PM
Re: Still not happy
 
Have you fitted a boost gauge yet, to make sure boost is still as we set it.

C. J. 18-10-2008 09:43 AM
Re: Still not happy
 
As i said on the phone Nige
Quote:
Originally Posted by SilverSurfer
Quote:
Originally Posted by Nige
Quote:
Originally Posted by SilverSurfer
Junk the sports cat and go full decat.
I felt the restriction of a sports cat when I was running 300BHP, so you will defo get a benefit running the 20G.
May also need to consider a full 3" system rather then the 2.5".
The revolution 3" is supposed to be quite good and not too loud.

Then of course, speak to CJ and get him to cut your bumper about and fit a FMIC (he's done a few now).

£540 for Revo Downpipe and System (3") http://www.revolution247.com/erol.html#69461X0

£185 for TSL Decat Downpipe (fits to std 2.5inch system) : http://www.tsl-motorsport.co.uk/newsite ... &detail=38
Hello mate. My exhaust is a TSL 3ins with a group n rear box also at 3ins.Thanks for the info though :) ;)
I don't think you have as most UK supplied systems are 2.5" in order to swap and change between OE and to get the cat back in/out.

The system will be 2.5" with a 4" tailpipe
The downpipe is 3" on the down sweep but it narrows to 2.5" at the flange in the last 6 inches or so where it meets the centre section.

I think your 333 upgrade pre-dates the pulse extraction system they now supply.
Even now this is an option :

-Thudercat downpipe, decat centre section, Group N backbox
or
-Pulse extraction exhaust system (+£352)

You should be able to tell bu how straight the centre section is.

3" Pulse Extraction :
[img]http://www.tsl-motorsport.co.uk/newsite/productimages/32/32.jpg[/img]

TSL Grp N
[img]http://www.tsl-motorsport.co.uk/newsite/productimages/35/35.jpg[/img]

[img]http://www.tsl-motorsport.co.uk/newsite/productimages/36/36.jpg[/img]


All times are GMT +1. The time now is 04:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.