|
Happy Bunny!
At last.....
....... I have made it into the 400's :norty: Many thanks to Simon (JGM) and Charlie today. After fitting a new RCM Induction Kit this week, Simon installed the new Simtek map today and then mapped it on the rollers. Got 413.5bhp & 405ft lb as the highest run, but Simon wound it back a bit to 410bhp & 400ft lb torque. Happy with those numbers, considering it's still top mount. Cheers Simon :doubleup: |
Well done mate. At last you got the 400/400 you were after. :drive:
|
Cheers mate. Got there in the end. Simon reckons with FMIC it would make 450 (CJ Figures). But I have got just what I wanted and am happy to stick.
It feels spot on too and sounds the nuts. :yeah: Next thing, brakes! |
Nice one mate... what boost was that at
|
Boost was just under 1.5
|
Sweet was just comparing yours to mine on the T :)
|
Nice one mate
Bet you are glad you got to the 400's at last |
Those are the numbers I have been after without going FMIC. I always said 400/400 on the top mount and then stop.
But, i'll see another shiny thing one day and like the Magpie that I am I won't be able to resist. :wink: What boost were you running James? Was that with FMIC? |
Quote:
|
You still coming to Brands on Monday?
|
Quote:
|
Quote:
|
Quote:
|
I bet you had a smile ear from ear on way back home! Sounded great Steve. Will post a pic of your graph in a minute!
|
|
Sounded great too - I'll be posting my slightly less impressive results in a min or two!
|
One happy Bunny!
http://i393.photobucket.com/albums/p...P1010031-2.jpg I must say I am really thinking of going for the simtek now! |
well done mate bet your pleased, you gotta to brands mate, would be good to have a passenger ride :whistle: whoops did i say that out loud lol
|
Well done Steve, got there then......that should keep you smiling.
Fuelling looks good too, nice and safe. |
nice one chap, bet you're well chuffed now :doubleup:
|
Just a shame he didn't have a spare Simtek with him or else it would have gone in mine!
|
Nice one Steve, sounded good on the M23:doubleup::10:
|
Quote:
|
Quality mate:yeah:
Hey 1st dibs on your brakes |
Quote:
|
Well done matey :10: so when you getting the front mount then :lol:
|
Quote:
Quote:
Good results there Steve, glad you got what you set out for :doubleup: |
Fantastic mate. After all you have put in it must be a pretty good feeling. As we said a while ago, every cloud ................
|
Cheers guys. :hurrah:
Really happy with it, looking forward to taking it out tomorrow for a bit of a blast. I'm still feeling bloody cold though, it was bitter there today :-o Once again though, thanks to Simon. Who has helped every step of the way with good advice and hard work. And to CJ who has been an absolute gem too, always willing to help me out. Thanks a lot :five: Now, no more mods before Germany ........ ....... :whistle: Ok then.................. not many :-P |
Quote:
Nice one Son !!! :SMBLU: |
Quote:
|
I think the smile say's it all!! Nice one:razz:
|
May not be quite so happy now.
The guy at the local polish car valetters has somehow fooked steves imobiliser by pressing it and turning the key a dozen times whilst trying to move the car. Dave from Gatwick is trying to sort it out. Fingers crossed the get a result, poor bugger was out for a blast took it for a clean and is now stuck in the bloody cold with a non starting scoob. |
Quote:
I'm not going to laugh............ much :rofl::rofl::rofl::rofl::rofl::rofl::rofl::rofl: I would of blown a fuse Steve....bloody polish!!! |
Yep blow a fuse & his happy again :wink:
|
Should have washed it himself then!!:lol::lol:
|
Congrats Worzel!
400+ is a nice club to be a member of... :more: |
Cheers Spooky, it sure is a fun place to be. :grin:
I was not very happy earlier for sure. 4 hours fookin about for a 15amp fuse :whistle: Thanks to Dave Hollamby, Martyn & CJ for their help today again, CJ came up trumps (yet again) just when Dave and I were planning recovery. So, Sunday.............. Anti Lag testing me thinks :twisted::nod: |
oh bugger..
|
Exactly the same thing that CJ had with that stall problem last weekend.
We were proper flummoxed :brickwall: Got there eventually :mrgreen: |
I take it they didnt charge you for the valet mate.
Well done to Dave and CJ:10: |
add 15 amp fuses to the ring list now!
|
So, Sunday.............. Anti Lag testing me thinks :twisted::nod: Take a vid of the car doing the anti lag thing mate so we can all see & hear. :10:
|
I might take a spare car on a trailer the way things seem to be going!
|
Quote:
|
Quote:
I would be carefull raising the rating to 20A |
I have been discussing it with SimTek, not currently sure if it is a simtek related problem or just a coincidence that CJ and Steve with the same issue and both now on SimTek and both after a stall.. it is possible at stall it fires all four coils which maybe enough to blow the 15amp fuse.
For the time being I'll fit a 20amp fuel with each SimTek on a newage lol. but my car has never done it and is on a simtek and I have just been out and deliberately stalled it a couple of times with no issue.. strange.. and I cannot believe the issue wouldn't have happened before now having installed so many. Simon |
Quote:
Whats the circuit that the fuse is protecting? |
ignition fuse iirc
|
So long as a 20Amp doesnt blow then cant see it being a problem if its on the ignition circuit.
Electronics is my thing and i have seen some nastys when a fuse value is increased. |
| All times are GMT +1. The time now is 11:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.