ecu
 

just had a look at my ecu it's a z4 been remap been told but I ave no idea wat ecu my wrx has meant to ave or if this is a diff one been mapped any ideas be great!! ;-)

I understand the z4 is a standard ecu ,can't remember what versions they were in... Think I may have one in mine... It a 4pin... My old one was 3pin and think a S9 ....

I don't. Think the z4 can be remapped. Ithink it can be chipped with a daughter board or the or chip swapped or something like that. Someone else will know

z4 is from a 1995 wrx. easy way to spot one is that it has the radio aerial on the rear wing instead of the a-pillar. this Ecu is the best of the bunch and rated at 260ps instead of 240.
if its been chipped open the ecu and post up a piccie as i may be able to tell who by.

cool I will try and open it tom at work

http://i1266.photobucket.com/albums/...6/59ab3e05.jpg
http://i1266.photobucket.com/albums/...6/ebcf5df4.jpg

hope this helps pic of ecu if you can say if its std or been played with cheers

It's running a ScoobyECU which I helped to develop and market.
It's running a Z4 base map, which was the best of the bunch, and the labels on the chips would indicate a setting of 1.2bar.

I can't vouch for the content of the chips or how well they have been mapped as they are not mine.
I would expect it is either mapped by Paul Blamire, Dave Wallis or Pat Hepbourne. They are the only other people I know who were using genuine scoobecu adaptor boards.