![]() |
Mid Engined Engine Options
I’ve started putting together some ideas and parts for my new project which will be along the lines of an open cockpit “LMP/Radical/Spire/Inverter” type car. I’m hoping to use as much Subaru running gear as possible. I despise bike engine cars so I’m currently thinking about using a 3.3 SVX or 3.0 H6 engine. My query is what needs to be done to bolt these engines to a 5 speed Impreza box. I want to avoid as much machining as possible if I can. I have to use the 5 speed box as this is the only box that currently can be converted to mid mounted configuration.
I don’t want to do too much too the engine tuning wise, I was thinking of a set of Jenvey throttle bodies, uprated exhaust and a different management system. Thoughts on tuning would also be welcome. Cheers all |
Bolt straight on ;)
|
Quote:
|
the matching box one...........
|
:
Quote:
|
Thought you might have a rest after your HEADACHE.:shark: So hows the car running? Must pop over and have a cup of tea with you. The Kit is now powered with a Cosworth turbo lump 365 bhp at the wheels making it a tad under 700 bhp per ton. :calm:Wheel spin all the way. :rofl:Ian is over the moon with it.
Speak soon. |
Quote:
Decided to build a proper track weapon, with the intention of going to Spa and getting a few good laps in. quite fancy something a little retro though along the lines of this: http://www.autoviva.com/img/photos/0..._img_25063.jpg Two seater with lights though, aka 908/917 keep me busy and out the pub for a while |
Yes Cosworth in the RH to much for me to handle but the new owner Lovesssssss it.:drive:
|
Quote:
|
Quote:
:GRANBY::kickbutt::wave: |
Quote:
:boom:Might not as a new five speed box and new rear running gear was fitted at the same time could make 155+ but I wouldn't have big enough dangly:meow: bits to test it out. :oldman: |
lol, if anyone spots a yellow retro looking seven with individual aero screens, forget it.
|
I've taken the plunge and bought an eg33 lump for this project.
http://farm8.staticflickr.com/7253/8...c1d389d72b.jpg I'm not after big horsepower, just fancy the soundtrack, though I would like to get the power up to about 350ish BHP I would be interested in anyone's thoughts on the best tuning options for this. Especially as there doesn't seem to be many performance parts readily available for these engines. |
All times are GMT +1. The time now is 10:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.