Todays up date.

Intercooler finally all connected back up.
Headers & Downpipe back on - Had to have the flange on the headers skimmed as it was slightly concave causing a blow.
Induction kit fitted
Something i was not expecting was that one of rad cooling fans strikes the intercooler pipework,had to remove fan and shave about 4 mm off the outer edge of each blade.
Just a few of the pipes to change now, Boost pipe to air box is too short to reach induction kit, expansion tank hoses are going to be replaced with samco to match the others and vacumn hose is too short.

Remaining jobs are:
Cam belt kit
Replace rear drop links
Change all oils
Trip to power station
JOB DONE

Oh and not forgetting injectors,Power FC and mapping by Scott