Quote:
Originally Posted by Mortster
Did you drive past me the other day Andy? I was just locking my gate up. Back of the shopping centre, riot central.
|
yep, that was me. saw u 2, didnt realise thats where u was till I saw the black scoob out back
Quote:
Originally Posted by Crowman
Hi.
A couple of questions , do they rub both sides.
Do the wheels look to sit the same both sides.
Did you have the geo done properly.
As Pieman has said, I did have a rubbing issue after fitting my BC's
To cut a long story short, one company were ****e, so I took it to JRM who corrected it and it's the nuts now.
Problem was the strut camber bolt needed loosening and the strut moving, then the geo settings sorted for camber, Toe etc.
My advice is , take it to JRM , 80 quid per hour, but worth every penny.
I just happen to have a brand new set of front and rear camber bolts if you need them. Cheap too  |
nope, just outside edge of drivers side wheel. its just missing the inner lip of the arch n is hitting the actual arch tunel above the wheel on the outside edge of the tyre.
when you say strut, you mean the two horizontal ones that go either side of the diff to the bottom of the hub ? cuz i just noticed the adjustment bolts on that.
I was gonna talk to JRM in a few weeks 2 see if they did MOT's so i'll see if i can get geo done at the same time cuz theres a few bushes I wanna change b4 i do that