Well, whilst we were all putting weight on over the Christmas period I decided that the P1 needed to lose a little bit more.
So we closed the shutters down, And started on the doors.
If you have never felt the weight of a door you would be shocked.
The motors and wiring has been taken out and any excess metal has been cut away we then drilled out the spot welds being careful not to drill through the door skin and started to cut out the side impact bars.
We can still fit an internal door panel with what's left but estimate we have lost about 10kgs per door.
you would not believe how nervous Josh was doing this to his boss's P1 doors !!!!!!!!!