Quote:
Originally Posted by andy-m
fit em yourself, easy enough. are they BC's ?
if they are BC's, the top bolt hole for the rear hub is bigger than needed so you can fit a camber adjustment bolt (They dont tell you that though). if you dont have a camber adjuster bolt for the rear coilovers, just make sure you push the top of the hub assy in towards the car when you do them up otherwise your tyre may just touch the wheel arch (Mine did).
if you do the front first, you will see what I mean about the camber adjuster bolt
|
Good advice, thanks Andy. So reading your note, they can be fitted without camber adjustment bolts but is perhaps better to have them?