I'll try and take some more pics tomorrow, but I'm in the process of fitting some KYB shocks and Eibachs which is a different story and proving to be a nightmare to change. But whilst doing this, I'm also have a good poke about to try and see if I can see whats been giving me a knocking noise..
I have lots o whiteline stuff and polybushes etc. But noticed my front roll bar, seems to slightly biased to one side which is causing the drop link to be forced over and making the roll bar in contact with the drop link when the wishbone is on full extent down. The other side doesn't do it.
Might be numpty question, but can I just slacken off the roll bar clamps and slide it towards one side to equalise the distance, which should then hopefully stop the drop link from being forced over and making contact with the rollbar.
Difficult to explain, but pic sort of shows whats going on. The drop links dont look right to me either ?.
