Few updates:
Neil started build the block which should be ready this week and will send me the pictures later on and i will post when we are receive them
We are today been at Leeds pick up again JDM big port heads and we are nought again wrong set,everything is OK on them,just head faces are not flat,they're have spits and will needs to be skimmed and this will ruin compression
At moment we are have 3 sets of the heads,one set of the cracked heads,which are OK for moderate power,but not for 600bhp,
Second set are Spec c heads,but on them will needs to be done valve reseating(as Neil said,he never seen Spec C heads in such state),plus there are missing cap bolts and valve caps
Third set is for which are been today are not good too and for us are useless,as Neil said,they will needs to be regardless skimmed but we can end with compression and in our case,is not the best option and Neil those don't recommend to use
Literally we are fed up with that and really is almost joke to have 3 sets of the heads,which are in such a poor state,in our case we can have build whihc is without the problems
Today we are learn,our mum have stomach cancer(we are spoken with sister about this,she said looking not good)
and really not the best start to New Year in every single way:censored:
Jura