Quote:
|
Originally Posted by C. J.
http://www.etsracing.com/p1.png
|
Not impressed with ETS as had a pair of blank covers from them to start with.
They were too big and I had to trim/sand loads off to get to fit. So much had to come of that it was almost down to just the front face with no profile extending into the cavity.
Even then the fit was very tight and not as per OE items.
I ended up cocking up the painting so they went in the bin and I got another set from the same place as scoobywez for £20. A much better fit and much closer to the OE size.
Thanks all for the comments but not sure if the covers will stay, as it looks a bit cross-eyed due to the covers and hence trumpets being at a slight angle (a bit like the Morgan Aero 8).
Cold air feed can pick up air from behind the black bumper grill as these don't do anything other then blow air into the wheel arch liner.
The brake cooling is fed from the slot in the bumper below that via a short piece of duct.