View Single Post
  #7  
Old 07-11-2013, 07:53 PM
EXEVO3's Avatar
EXEVO3 EXEVO3 is offline
Silver Member
 
Join Date: Sep 2013
Location: Kent SITTINGBOURNE
Posts: 554
Default

Quote:
Originally Posted by SilverSurfer View Post
Sounds like you are in the right place.
Does the car feel considerably slower then usual ?

It sounds like it could be one of a few things :
The BCS is not working or the pipes to/from it are blocked therefore the boost control is not bleeding way the boost from the actuator so you are only getting actuator pressure and not ECU controlled pressure.
The Green diagnostic connectors are connected under the dash.
The MAF is knackered and dropping the boost (seen this a few times on the early classics). Cleaning the MAF can help but it normally gives the same problems a short time later.
well this is the problem..i never had any way of telling boost till now...it feels same as normal...so clearly i have never had full boost...

supposed to be on rollers sat afternoon....fek sake
__________________
V2 WRX
Reply With Quote