Quote:
Originally Posted by Red Baron
As you know the ST2s only just clear the 4 pots by a few mm, Scott tried an ST2 with Brembos and needed a 12mm spacer, have a measure with your old and new wheels, if there's less than 10mm clearance with your current wheels and 4 pots you'll struggle to clear Brembos without a spacer.
Shane
|
The problem area with Brembo's is not the face of the caliper but the inner edge/corner where the piston bulges the casting nearest the hub.
The style of the wheel in how the spokes flow out from the hub centre are the controlling factor.
The smaller the offset the more these spokes will be pushed out from the hub centre flange.
If the spokes naturaly flow out sharply then the offset it not so critical.