Dremel and wire attachment.
to be honest to take the pistons out and buy a set of reseals etc doesn't cost much or take long.it's worth it just to know they are clean smooth and 100% working.
you just need to pick up a spare tyre valve cut it down to the metal connect it to a for pump psh it onto the bleed screw point and pump the pistons out.
clean them up and inside the caliper then as soon as you are certain the caliper is very clean paint away and don't bother with a primer if you have the correct caliper paint.
then when happy with as many coats as you can be bothered to do refit the new seals springs and job done.
did mine a while back.
and so glad I did service them.
__________________
I know people,that know people,know what i mean?
|