Couple of trivial bits on the go while I'm sorting out the wiring loom plugs and pins etc...
First thing was to get a set of late model individual coils. Hopefully this should help with the performance and if nothing else makes for a nicer tidy engine bay in loosing the mid mounted coil pack and bright red HT leads!
net result without the coil in there.... much neater
The other thing I have been poking around at is the lights. I have seen a couple of the version 5/6 cars with modded blacked headlights. I think it look very cool so I have set about doing mine. There was another small issue to tackle too. As I have the oil cooler one side of the front bumper and the power steeing pump the other I have removed the indicators and little black plastic infill from the bumper. My decision was to move LED indicators into the side light housing whilst blacking them. I used a set of LED bike indicators.
Started with these:
Then did this:
Threw them in here:
And wayhay:
So with the indicstors and side lights in the one housing I can set about ducting the cooler and pump
Oh and here is a painted pair next to the pair I'll be doing in the morning