[Security_Paul]

One of my mates owns a local detailing business, so I gave him my Hawk for a paint correction. Here's his write up with pictures;

Where to start! This was a little bit of a challenge but none the less after hard work and determination we managed to turn it round in a weekend.
This lovely Subaru arrived with us looking a little sorry for itself after years of washing on this soft paint!
The process was as follows:
Fully rinsed down
Snow foamed with Valet Pro PH neautral
Initially washed using Zaino Z7
Wheels cleaned with bilburry
Clayed to remove surface contaminants
Snow foamed and wash once again
Dried, then damage inspected
After playing around with a few pad/polish combinations Rupes UHS was used in conjunction with a Rupes pad, this lead too around 85% correction after a couple of hits.
Once the car had been completely corrected or as good as within the time allowed it was washed once more before carefully drying to allow the sealing process.
The surface was then covered in Z-AIO, this was allowed to haze before buffing off then a final application of Z5 to finish .
Wheelse then sealed and tyres dressed.
Overall this car took 2 full days work,