Quote:
Originally Posted by viper1982
Understood thanks
|
On the MY2001/02 you can do a little trick with Load to increase the MAF capability.
There is a code/resolution limit of 300g/s for MAF scaling. When you run a bigger turbo you can run into this problem.
The MAF is capable of running more than 300g/s but you just cant scale it.
If you half all the g/s values in the MAF scaling then half all the Load Scale axis for every Map that uses Load (mainly fuel and ignition maps but there may be a few more I cant remember as it was over 10 years ago I did this last) you can trick it into running more than 300g/s.
Because 150g/s in the MAF scale will be equivalent to 300g/s