Minor update.
When I checked my Apexi PFC MAF scale the voltage ran upto 5.12V.
I then checked old data I had on the Ae802 the table was presented with a range of 0 - 512, so I assumed this was equivalent to 0 - 5.12V.
The top few cells are maxed at 300g/s, so I have limited the scale to 4.64V which is the 1st 300g/s.
A Max of 4.64V is very similar to the WRX 2001> which has a max of 4.69V.
Therefore I have adjusted the MAF Voltage scale to match this. Although this is still hard coded.
Many hours of staring at hexadecimal data in the BIN has not identified if the MAF Voltage scale exists in the code.
What websites/forums have you been using for JECS and MY99/00 decoding ?
I assume none have as much data as we have here ?
|