Quote:
Originally Posted by Greig
thanks what setting will it need to be with 740cc injectors and a walbro 255 pump?
Also when my engine comes back from the builder and we get it back in etc, is there a default setting for the apexi to run the engine in on?
The spec is totally different from before. Cheers
|
set the fpr to 3bar with the vacum hose attached
the injector values on the apexi will need to be dropped, but the value depends on the injectors used,how well they flow and their spray pattern.
no running in map as such.
I would need to see the car to put a safe running in map on.