Time to take the wing off to make it easier to make a nice neat job of cutting the hole in inner wing.
I used a starret cutter, then filed down sharp edges.Just needs some edging strip to finish it.
Intercooler hose in place, A bit of white smootherite around the hole edges to stop the rust
The pille of bits are growing,going to weigh all at end of job.
Intercooler and pipework finished, appart from the Mikalr clamps,As yet to arrive.
Tone
I have ordered a load of blue silicon pipes/hoses for vacumn and water pipes.
I have now relocated the ABS pump electrics,there is plenty of cable on the two main looms, but one power feed needs extending,easy job as it has a ring terminal on the end.
I moved the electrics forward by about 1 1/2 inches, just needto make a little plate to attach to the exisiting bracket.
So in the end not a drama as i thought it would be.
Will put some pics up once finished.