Thread: ECU upgrade
View Single Post
  #19  
Old 24-03-2011, 08:41 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

1. ESL Phase 2 Live mapping board £295 + £200-£250 for mapping
2. Apexi PFC £450 approx 2nd hand (as discontinued and cannot get new) + £200-£250 for mapping
3. Simtek approx £1000 fitted and Mapped
4. Simtex with Anti-lag/Launch Control approx £1200 fitted an mapped

To get decent gains out of any of those you will need at least :

440cc injectors and FPR, or 550cc injector
3 bar map sensor

For the sake of £70 a Walbro 255 Fuel Pump is also recommended.

Without the 3 bar map sensor you are limited to around 1.2bar, upto approx 310BHP max.
With the 3 bar and injectors on the TD05 turbo you can run 1.4/1.5 bar, upto 340/350BHP

All the above assumes the car is already decatted and running improved induction filtration.
Reply With Quote