Hi Gary,
sorry for delay,
Measured from the centre of the centre cap to the wheel arch in millimetres...
........NS OS
Front 330 332
Rear. 335 335 (*rears have the widetrack arch extensions so could add 2/3mm on if you don't have these to get same angles as they extend below the metal arch behind by a couple of mm)
That's measured without anyone in, the heights/geometry etc where done with 50kg in the driver seat so that should be not far off spot on when your sat in it..
The Tein type flex spring rates in mine I believe are 7kg front and 6kg rear..
The Cambers are -1.48 degrees front and -1.35 rear. Caster = 4.4
Believe this is a fast road set-up.
quite some rake angle from just 5mm difference in height!
Dave.
ps. Can park them next to each other at modified live and see how similar the angles are after your done??
