Quote:
Originally Posted by Steve_PPP
As Ian, says, it could be down to poor discs/pads - have you had to change any parts in the last two years?
Even if they aren't great, you shouldn't get grinding noises though. Have you checked the general condition of the pads/discs and that the pistons aren't sticky?
|
Not had to change any parts in the past 2 years. Had them checked three times due to the noise but was just told that the pads maybe "too aggressive". Not sure if that means too hard or what??
Discs appear in good condition, ie no crakes. What else should I look for?
How would I check whether pistons are sticky?