Given what I had spend on the car it had left me with not many choices I the way I could then move forward to rebuild the car. I have used a lot of parts I already had (some a bit over the top) but bought some more choice parts along the way.
And it started with this. A sterling find on ebay.
Gaskets and bearing where bought from RCM. ACL bearings, 14mm studs and thicker head gaskets.
Pistons I got though Wiseco, we use them for other things.
Now the block though and EJ22 was an open deck EJ motor. This could lead to the same liner issue that I had had before so I decided to 'pin' the barrels. This was done with ally dowels that where put into tight channels that where spark eroded in.
